qrhi.cpp 116 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
/****************************************************************************
**
** Copyright (C) 2018 The Qt Company Ltd.
** Contact: http://www.qt.io/licensing/
**
** This file is part of the Qt RHI module
**
** $QT_BEGIN_LICENSE:LGPL3$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see http://www.qt.io/terms-conditions. For further
** information use the contact form at http://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 3 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPLv3 included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 3 requirements
** will be met: https://www.gnu.org/licenses/lgpl.html.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 2.0 or later as published by the Free
** Software Foundation and appearing in the file LICENSE.GPL included in
** the packaging of this file. Please review the following information to
** ensure the GNU General Public License version 2.0 requirements will be
** met: http://www.gnu.org/licenses/gpl-2.0.html.
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "qrhi_p.h"
#include <qmath.h>

Laszlo Agocs's avatar
Laszlo Agocs committed
40
#include "qrhinull_p.h"
41
#ifndef QT_NO_OPENGL
42
#include "qrhigles2_p.h"
43
#endif
44 45 46 47 48 49 50 51 52 53 54 55
#if QT_CONFIG(vulkan)
#include "qrhivulkan_p.h"
#endif
#ifdef Q_OS_WIN
#include "qrhid3d11_p.h"
#endif
#ifdef Q_OS_DARWIN
#include "qrhimetal_p.h"
#endif

QT_BEGIN_NAMESPACE

Laszlo Agocs's avatar
Laszlo Agocs committed
56 57 58
/*!
    \class QRhi
    \inmodule QtRhi
Laszlo Agocs's avatar
Laszlo Agocs committed
59 60

    \brief Accelerated 2D/3D graphics API abstraction.
Laszlo Agocs's avatar
Laszlo Agocs committed
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152

     QRhi is an abstraction for hardware accelerated graphics APIs, such as,
     \l{https://www.khronos.org/opengl/}{OpenGL},
     \l{https://www.khronos.org/opengles/}{OpenGL ES},
     \l{https://docs.microsoft.com/en-us/windows/desktop/direct3d}{Direct3D},
     \l{https://developer.apple.com/metal/}{Metal}, and
     \l{https://www.khronos.org/vulkan/}{Vulkan}.

    Each QRhi instance is backed by a backend for a specific graphics API. The
    selection of the backend is a run time choice and is up to the application
    or library that creates the QRhi instance. Some backends are available on
    multiple platforms (OpenGL, Vulkan, Null), while APIs specific to a given
    platform are only available when running on the platform in question (Metal
    on macOS/iOS/tvOS, Direct3D on Windows).

    \section2 Design Fundamentals

    A QRhi cannot be instantiated directly. Instead, use the create()
    function. Delete the QRhi instance normally to release the graphics device.

    \section3 Resources

    Instances of classes deriving from QRhiResource, such as, QRhiBuffer,
    QRhiTexture, etc., encapsulate zero, one, or more native graphics
    resources. Instances of such classes are always created via the \c new
    functions of the QRhi, such as, newBuffer(), newTexture(),
    newTextureRenderTarget(), newSwapChain().

    \list

    \li The returned value from both create() and functions like newBuffer() is
    owned by the caller.

    \li Unlike QRhi, subclasses of QRhiResource should not be destroyed
    directly via delete without calling QRhiResource::release(). The typical
    approach is to call QRhiResource::releaseAndDestroy(). This is equivalent
    to QRhiResource::release() followed by \c delete.

    \li Just creating a QRhiResource subclass never allocates or initalizes any
    native resources. That is only done when calling the \c build function of a
    subclass, for example, QRhiBuffer::build() or QRhiTexture::build().

    \li The exception is
    QRhiTextureRenderTarget::newCompatibleRenderPassDescriptor() and
    QRhiSwapChain::newCompatibleRenderPassDescriptor(). There is no \c build
    operation for these and the returned object is immediately active.

    \li The resource objects themselves are treated as immutable: once a
    resource is built, changing any parameters via the setters, such as,
    QRhiTexture::setPixelSize(), has no effect, unless the underlying native
    resource is released and \c build is called again. See more about resource
    reuse in the sections below.

    \li The underlying native resources are scheduled for releasing by calling
    QRhiResource::release(). Backends often queue release requests and defer
    executing them to an unspecified time, this is hidden from the
    applications. This way applications do not have to worry about releasing a
    native resource that may still be in use by an in flight frame.

    \endlist

    \badcode
        vbuf = rhi->newBuffer(QRhiBuffer::Immutable, QRhiBuffer::VertexBuffer, sizeof(vertexData));
        if (!vbuf->build()) { error }
        ...
        vbuf->releaseAndDestroy();
    \endcode

    \section3 Resource reuse

    From the user's point of view the QRhiResource is reusable immediately
    after calling QRhiResource::release(). With the exception of swapchains,
    calling \c build on an already built object does an implicit release. This
    provides a handy shortcut to reuse a QRhiResource instance with different
    parameters, with a new native graphics resource underneath.

    The importance of reusing the same object lies in the fact that some
    objects reference other objects: for example, a QRhiShaderResourceBindings
    can reference QRhiBuffer, QRhiTexture, and QRhiSampler instances. If now
    one of these buffers need to be resized or a sampler parameter needs
    changing, destroying and creating a whole new QRhiBuffer or QRhiSampler
    would invalidate all references to the old instance. By just changing the
    appropriate parameters via QRhiBuffer::setSize() or similar and then
    calling QRhiBuffer::build(), everything works as expected and there is no
    need to touch the QRhiShaderResourceBindings at all, even though there is a
    good chance that under the hood the QRhiBuffer is now backed by a whole new
    native buffer.

    \badcode
        ubuf = rhi->newBuffer(QRhiBuffer::Dynamic, QRhiBuffer::UniformBuffer, 256);
        ubuf->build();

153
        srb = rhi->newShaderResourceBindings()
Laszlo Agocs's avatar
Laszlo Agocs committed
154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225
        srb->setBindings({
            QRhiShaderResourceBinding::uniformBuffer(0, QRhiShaderResourceBinding::VertexStage | QRhiShaderResourceBinding::FragmentStage, ubuf)
        });
        srb->build();

        ...

        // now suddenly we need buffer with a different size
        ubuf->setSize(512);
        ubuf->build(); // same as ubuf->release(); ubuf->build();

        // that's it, srb needs no changes whatsoever
    \endcode

    \section3 Pooled objects

    There are pooled objects too, like QRhiResourceUpdateBatch. An instance is
    retrieved via a \c next function, such as, nextResourceUpdateBatch(). The
    caller does not own the returned instance in this case. The only valid way
    of operating here is calling functions on the QRhiResourceUpdateBatch and
    then passing it to QRhiCommandBuffer::beginPass() or
    QRhiCommandBuffer::endPass(). These functions take care of returning the
    batch to the pool. Alternatively, a batch can be "canceled" and returned to
    the pool without processing by calling QRhiResourceUpdateBatch::release().

    A typical pattern is thus:

    \badcode
        QRhiResourceUpdateBatch *resUpdates = rhi->nextResourceUpdateBatch();
        ...
        resUpdates->updateDynamicBuffer(ubuf, 0, 64, mvp.constData());
        if (!image.isNull()) {
            resUpdates->uploadTexture(texture, image);
            image = QImage();
        }
        ...
        QRhiCommandBuffer *cb = m_sc->currentFrameCommandBuffer();
        cb->beginPass(swapchain->currentFrameRenderTarget(), clearCol, clearDs, resUpdates);
    \endcode

    \section3 Swapchain specifics

    QRhiSwapChain features some special semantics due to the peculiar nature of
    swapchains.

    \list

    \li It has no \c build but rather a QRhiSwapChain::buildOrResize().
    Repeatedly calling this function is \b not the same as calling
    QRhiSwapChain::release() followed by QRhiSwapChain::buildOrResize(). This
    is because swapchains often have ways to handle the case where buffers need
    to be resized in a manner that is more efficient than a brute force
    destroying and recreating from scratch.

    \li An active QRhiSwapChain must be released by calling
    QRhiSwapChain::release() whenever the targeted QWindow sends the
    QPlatformSurfaceEvent::SurfaceAboutToBeDestroyed event. It should not be
    postponed since releasing the swapchain may become problematic when the
    native window is not around anymore (e.g. because the QPlatformWindow got
    destroyed already when getting a QWindow::close())

    \endlist

    \section3 Ownership

    The general rule is no ownership transfer. Creating a QRhi with an already
    existing graphics device does not mean the QRhi takes ownership of the
    device object. Similarly, ownership is not given away when a device or
    texture object is "exported" via QRhi::nativeHandles() or
    QRhiTexture::nativeHandles(). Most importantly, passing pointers in structs
    and via setters does not transfer ownership.

226 227 228 229
    \section3 Threading

    A QRhi instance can be created and used on any thread but all usage must be
    limited to that one single thread. When it comes to native objects, such as
Laszlo Agocs's avatar
Laszlo Agocs committed
230 231
    OpenGL contexts, passed in via a QRhiNativeHandles subclass, it is up to
    the application to ensure they are not misused by other threads.
232

Laszlo Agocs's avatar
Laszlo Agocs committed
233
    \sa {Qt Shader Tools}
Laszlo Agocs's avatar
Laszlo Agocs committed
234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284
 */

/*!
    \enum QRhi::Implementation
    Describes which graphics API-specific backend gets used by a QRhi instance.

    \value Null
    \value Vulkan
    \value OpenGLES2
    \value D3D11
    \value Metal
 */

/*!
    \enum QRhi::Flag
    Describes what special features to enable.

    \value EnableProfiling Enables gathering timing (CPU, GPU) and resource
    (QRhiBuffer, QRhiTexture, etc.) information and additional metadata. See
    QRhiProfiler. Avoid enabling in production builds as it may involve a
    performance penalty.

    \value EnableDebugMarkers Enables debug marker groups. Without this frame
    debugging features like making debug groups and custom resource name
    visible in external GPU debugging tools will not be available and functions
    like QRhiCommandBuffer::debugMarkBegin() will become a no-op. Avoid
    enabling in production builds as it may involve a performance penalty.
 */

/*!
    \enum QRhi::FrameOpResult
    Describes the result of operations that can have a soft failure.

    \value FrameOpSuccess Success

    \value FrameOpError Unspecified error

    \value FrameOpSwapChainOutOfDate The swapchain is in an inconsistent state
    internally. This can be recoverable by attempting to repeat the operation
    (such as, beginFrame()) later.

    \value FrameOpDeviceLost The graphics device was lost. This can be
    recoverable by attempting to repeat the operation (such as, beginFrame())
    and releasing and reinitializing all objects backed by native graphics
    resources.
 */

/*!
    \enum QRhi::Feature
    Flag values to indicate what features are supported by the backend currently in use.

285 286
    \value MultisampleTexture Indicates that textures with a sample count larger
    than 1 are supported.
287

288 289
    \value MultisampleRenderBuffer Indicates that renderbuffers with a sample
    count larger than 1 are supported.
290

291
    \value DebugMarkers Indicates that debug marker groups (and so
292 293
    QRhiCommandBuffer::debugMarkBegin()) are supported.

294 295
    \value Timestamps Indicates that command buffer timestamps are supported.
    Relevant for QRhiProfiler::gpuFrameTimes().
296

297
    \value Instancing Indicates that instanced drawing is supported.
298

299 300
    \value CustomInstanceStepRate Indicates that instance step rates other than
    1 are supported.
301

302 303
    \value PrimitiveRestart Indicates that restarting the assembly of
    primitives when encountering an index value of 0xFFFF
304 305 306 307 308 309 310 311 312 313 314
    (\l{QRhiCommandBuffer::IndexUInt16}{IndexUInt16}) or 0xFFFFFFFF
    (\l{QRhiCommandBuffer::IndexUInt32}{IndexUInt32}) is always enabled, for
    certain primitive topologies at least. Due to the wildly varying primitive
    restart behavior and support in the underlying graphics APIs, primitive
    restart cannot be controlled with QRhi. Instead, applications must assume
    that whenever this feature is reported as supported, the above mentioned
    index values \c may be treated specially, depending on the topology. The
    only two topologies where primitive restart is guaranteed to behave
    identically across backends, as long as this feature is reported as
    supported, are \l{QRhiGraphicsPipeline::LineStrip}{LineStrip} and
    \l{QRhiGraphicsPipeline::TriangleStrip}{TriangleStrip}.
Laszlo Agocs's avatar
Laszlo Agocs committed
315 316 317 318 319 320 321 322 323 324 325 326 327 328 329
 */

/*!
    \enum QRhi::ResourceSizeLimit
    Describes the resource limit to query.

    \value TextureSizeMin Minimum texture width and height. This is typically
    1. The minimum texture size is handled gracefully, meaning attempting to
    create a texture with an empty size will instead create a texture with the
    minimum size.

    \value TextureSizeMax Maximum texture width and height. This depends on the
    graphics API and sometimes the platform or implementation as well.
    Typically the value is in the range 4096 - 16384. Attempting to create
    textures larger than this is expected to fail.
Laszlo Agocs's avatar
Laszlo Agocs committed
330 331 332 333 334
 */

/*!
    \class QRhiInitParams
    \inmodule QtRhi
335
    \brief Base class for backend-specific initialization parameters.
336 337 338 339 340 341 342 343 344 345 346

    Contains fields that are relevant to all backends.

    \l resourceSharingHost is set to null by default. Setting it to an actual
    QRhiResourceSharingHost instance is optional. When set, it causes the QRhi
    to share either the graphics device, or, in case of OpenGL, use a context
    that shares resources, with all other QRhi instances that have the same
    QRhiResourceSharingHost set in their QRhiInitParams. This makes the
    underlying graphics resources of QRhiResource subclasses such as
    QRhiTexture visible to all the QRhi instances that use the same
    QRhiResourceSharingHost.
Laszlo Agocs's avatar
Laszlo Agocs committed
347 348 349 350 351
 */

/*!
    \class QRhiColorClearValue
    \inmodule QtRhi
352
    \brief Specifies a clear color for a color buffer.
Laszlo Agocs's avatar
Laszlo Agocs committed
353 354
 */

355 356 357
/*!
    Constructs a color clear value with \c{(0, 0, 0, 1)} (opaque black).
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
358 359 360 361 362
QRhiColorClearValue::QRhiColorClearValue()
    : m_rgba(0, 0, 0, 1)
{
}

363 364 365 366
/*!
    Constructs a color clear value with the floating point color components
    (\c{0.0f - 1.0f}) specified in \a c.
  */
Laszlo Agocs's avatar
Laszlo Agocs committed
367 368 369 370 371
QRhiColorClearValue::QRhiColorClearValue(const QVector4D &c)
    : m_rgba(c)
{
}

372 373 374 375
/*!
    Constructs a color clear value with the floating point color components
    (\c{0.0f - 1.0f}) specified in \a r, \a g, \a b, and \a a.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
376 377 378 379 380
QRhiColorClearValue::QRhiColorClearValue(float r, float g, float b, float a)
    : m_rgba(r, g, b, a)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
381 382 383
/*!
    \class QRhiDepthStencilClearValue
    \inmodule QtRhi
384
    \brief Specifies clear values for a depth or stencil buffer.
Laszlo Agocs's avatar
Laszlo Agocs committed
385 386
 */

387 388 389 390
/*!
    Constructs a depth/stencil clear value with depth clear value 1.0f and
    stencil clear value 0.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
391 392 393 394 395 396
QRhiDepthStencilClearValue::QRhiDepthStencilClearValue()
    : m_d(1),
      m_s(0)
{
}

397 398 399 400
/*!
    Constructs a depth/stencil clear value with depth clear value \a d and
    stencil clear value \a s.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
401 402 403 404 405 406
QRhiDepthStencilClearValue::QRhiDepthStencilClearValue(float d, quint32 s)
    : m_d(d),
      m_s(s)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
407 408 409
/*!
    \class QRhiViewport
    \inmodule QtRhi
410
    \brief Specifies a viewport rectangle.
411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428

    Used with QRhiCommandBuffer::setViewport().

    \note QRhi assumes OpenGL-style viewport coordinates, meaning x and y are
    bottom-left.

    Typical usage is like the following:

    \badcode
      const QSize outputSizeInPixels = swapchain->currentPixelSize();
      const QRhiViewport viewport(0, 0, outputSizeInPixels.width(), outputSizeInPixels.height());
      cb->beginPass(swapchain->currentFrameRenderTarget(), { 0, 0, 0, 1 }, { 1, 0 });
      cb->setGraphicsPipeline(ps);
      cb->setViewport(viewport);
      ...
    \endcode

    \sa QRhiCommandBuffer::setViewport(), QRhi::clipSpaceCorrMatrix(), QRhiScissor
Laszlo Agocs's avatar
Laszlo Agocs committed
429 430
 */

431 432 433 434 435 436
/*!
    Constructs a viewport description with a default rectangle and depth range.
    The default depth range is 0.0f - 1.0f.

    \sa QRhi::clipSpaceCorrMatrix()
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
437 438 439 440 441 442 443
QRhiViewport::QRhiViewport()
    : m_rect(0, 0, 1280, 720),
      m_minDepth(0),
      m_maxDepth(1)
{
}

444 445 446 447 448 449 450 451
/*!
    Constructs a viewport description with the rectangle specified by \a x, \a
    y, \a w, \a h and the depth range \a minDepth and \a maxDepth.

    \note x and y are assumed to be the bottom-left position.

    \sa QRhi::clipSpaceCorrMatrix()
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
452 453 454 455 456 457 458
QRhiViewport::QRhiViewport(float x, float y, float w, float h, float minDepth, float maxDepth)
    : m_rect(x, y, w, h),
      m_minDepth(minDepth),
      m_maxDepth(maxDepth)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
459 460 461
/*!
    \class QRhiScissor
    \inmodule QtRhi
462
    \brief Specifies a scissor rectangle.
463 464 465 466 467

    Used with QRhiCommandBuffer::setScissor(). Setting a scissor rectangle is
    only possible with a QRhiGraphicsPipeline that has
    QRhiGraphicsPipeline::UsesScissor set.

Laszlo Agocs's avatar
Laszlo Agocs committed
468
    \note QRhi assumes OpenGL-style scissor coordinates, meaning x and y are
469 470 471
    bottom-left.

    \sa QRhiCommandBuffer::setScissor(), QRhiViewport
Laszlo Agocs's avatar
Laszlo Agocs committed
472 473
 */

474 475 476
/*!
    Constructs an empty scissor.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
477 478 479 480
QRhiScissor::QRhiScissor()
{
}

481 482 483 484 485 486
/*!
    Constructs a scissor with the rectangle specified by \a x, \a y, \a w, and
    \a h.

    \note x and y are assumed to be the bottom-left position.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
487 488 489 490
QRhiScissor::QRhiScissor(int x, int y, int w, int h)
    : m_rect(x, y, w, h)
{
}
Laszlo Agocs's avatar
Laszlo Agocs committed
491 492

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
493
    \class QRhiVertexInputBinding
Laszlo Agocs's avatar
Laszlo Agocs committed
494
    \inmodule QtRhi
495
    \brief Describes a vertex input binding.
496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513

    Specifies the stride (in bytes, must be a multiple of 4), the
    classification and optionally the instance step rate.

    As an example, assume a vertex shader with the following inputs:

    \badcode
        layout(location = 0) in vec4 position;
        layout(location = 1) in vec2 texcoord;
    \endcode

    Now let's assume also that 3 component vertex positions \c{(x, y, z)} and 2
    component texture coordinates \c{(u, v)} are provided in a non-interleaved
    format in a buffer (or separate buffers even). Definining two bindings
    could then be done like this:

    \badcode
        QRhiVertexInputLayout inputLayout;
Laszlo Agocs's avatar
Laszlo Agocs committed
514
        inputLayout.setBindings({
515 516
            { 3 * sizeof(float) },
            { 2 * sizeof(float) }
Laszlo Agocs's avatar
Laszlo Agocs committed
517
        });
518 519 520
    \endcode

    Only the stride is interesting here since instancing is not used. The
Laszlo Agocs's avatar
Laszlo Agocs committed
521
    binding number is given by the index of the QRhiVertexInputBinding
522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541
    element in the bindings vector of the QRhiVertexInputLayout.

    Once a graphics pipeline with this vertex input layout is bound, the vertex
    inputs could be set up like the following for drawing a cube with 36
    vertices, assuming we have a single buffer with first the positions and
    then the texture coordinates:

    \badcode
        cb->setVertexInput(0, { { cubeBuf, 0 }, { cubeBuf, 36 * 3 * sizeof(float) } });
    \endcode

    Note how the index defined by \c {startBinding + i}, where \c i is the
    index in the second argument of
    \l{QRhiCommandBuffer::setVertexInput()}{setVertexInput()}, matches the
    index of the corresponding entry in the \c bindings vector of the
    QRhiVertexInputLayout.

    \note the stride must always be a multiple of 4.

    \sa QRhiCommandBuffer::setVertexInput()
Laszlo Agocs's avatar
Laszlo Agocs committed
542 543
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
544
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
545
    \enum QRhiVertexInputBinding::Classification
Laszlo Agocs's avatar
Laszlo Agocs committed
546 547 548 549 550 551
    Describes the input data classification.

    \value PerVertex Data is per-vertex
    \value PerInstance Data is per-instance
 */

552 553 554
/*!
    Constructs an empty vertex input binding description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
555 556 557 558
QRhiVertexInputBinding::QRhiVertexInputBinding()
{
}

559 560 561 562 563 564 565
/*!
    Constructs a vertex input binding description with the specified \a stride,
    classification \a cls, and instance step rate \a stepRate.

    \note \a stepRate other than 1 is only supported when
    QRhi::CustomInstanceStepRate is reported to be supported.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
566 567 568 569 570 571 572
QRhiVertexInputBinding::QRhiVertexInputBinding(quint32 stride, Classification cls, int stepRate)
    : m_stride(stride),
      m_classification(cls),
      m_instanceStepRate(stepRate)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
573
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
574
    \class QRhiVertexInputAttribute
Laszlo Agocs's avatar
Laszlo Agocs committed
575
    \inmodule QtRhi
576
    \brief Describes a single vertex input element.
577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598

    The members specify the binding number, location, format, and offset for a
    single vertex input element.

    \note For HLSL it is assumed that the vertex shader uses
    \c{TEXCOORD<location>} as the semantic for each input. Hence no separate
    semantic name and index.

    As an example, assume a vertex shader with the following inputs:

    \badcode
        layout(location = 0) in vec4 position;
        layout(location = 1) in vec2 texcoord;
    \endcode

    Now let's assume that we have 3 component vertex positions \c{(x, y, z)}
    and 2 component texture coordinates \c{(u, v)} are provided in a
    non-interleaved format in a buffer (or separate buffers even). Once two
    bindings are defined, the attributes could be specified as:

    \badcode
        QRhiVertexInputLayout inputLayout;
Laszlo Agocs's avatar
Laszlo Agocs committed
599
        inputLayout.setBindings({
600 601
            { 3 * sizeof(float) },
            { 2 * sizeof(float) }
Laszlo Agocs's avatar
Laszlo Agocs committed
602 603 604 605 606
        });
        inputLayout.setAttributes({
            { 0, 0, QRhiVertexInputAttribute::Float3, 0 },
            { 1, 1, QRhiVertexInputAttribute::Float2, 0 }
        });
607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623
    \endcode

    Once a graphics pipeline with this vertex input layout is bound, the vertex
    inputs could be set up like the following for drawing a cube with 36
    vertices, assuming we have a single buffer with first the positions and
    then the texture coordinates:

    \badcode
        cb->setVertexInput(0, { { cubeBuf, 0 }, { cubeBuf, 36 * 3 * sizeof(float) } });
    \endcode

    When working with interleaved data, there will typically be just one
    binding, with multiple attributes refering to that same buffer binding
    point:

    \badcode
        QRhiVertexInputLayout inputLayout;
Laszlo Agocs's avatar
Laszlo Agocs committed
624
        inputLayout.setBindings({
625
            { 5 * sizeof(float) }
Laszlo Agocs's avatar
Laszlo Agocs committed
626 627 628 629 630
        });
        inputLayout.setAttributes({
            { 0, 0, QRhiVertexInputAttribute::Float3, 0 },
            { 0, 1, QRhiVertexInputAttribute::Float2, 3 * sizeof(float) }
        });
631 632 633 634 635 636 637 638 639
    \endcode

    and then:

    \badcode
        cb->setVertexInput(0, { { interleavedCubeBuf, 0 } });
    \endcode

    \sa QRhiCommandBuffer::setVertexInput()
Laszlo Agocs's avatar
Laszlo Agocs committed
640 641
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
642
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
643
    \enum QRhiVertexInputAttribute::Format
Laszlo Agocs's avatar
Laszlo Agocs committed
644 645 646 647 648 649 650 651 652 653 654
    Specifies the type of the element data.

    \value Float4 Four component float vector
    \value Float3 Three component float vector
    \value Float2 Two component float vector
    \value Float Float
    \value UNormByte4 Four component normalized unsigned byte vector
    \value UNormByte2 Two component normalized unsigned byte vector
    \value UNormByte Normalized unsigned byte
 */

655 656 657
/*!
    Constructs an empty vertex input attribute description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
658 659 660 661
QRhiVertexInputAttribute::QRhiVertexInputAttribute()
{
}

662 663 664 665
/*!
    Constructs a vertex input attribute description with the specified \a
    binding number, \a location, \a format, and \a offset.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
666 667 668 669 670 671 672 673 674 675 676 677
QRhiVertexInputAttribute::QRhiVertexInputAttribute(int binding, int location, Format format, quint32 offset)
    : m_binding(binding),
      m_location(location),
      m_format(format),
      m_offset(offset)
{
}

/*!
    \class QRhiVertexInputLayout
    \inmodule QtRhi
    \brief Describes the layout of vertex inputs consumed by a vertex shader.
678 679 680

    The vertex input layout is defined by the collections of
    QRhiVertexInputBinding and QRhiVertexInputAttribute.
Laszlo Agocs's avatar
Laszlo Agocs committed
681 682
 */

683 684 685
/*!
    Constructs an empty vertex input layout description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
686 687 688 689
QRhiVertexInputLayout::QRhiVertexInputLayout()
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
690 691 692
/*!
    \class QRhiGraphicsShaderStage
    \inmodule QtRhi
693
    \brief Specifies the type and the shader code for a shader stage in the graphics pipeline.
694 695 696

    \note There is no geometry stage because some graphics APIs (Metal) have no support
    for it.
Laszlo Agocs's avatar
Laszlo Agocs committed
697 698
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
699 700 701 702 703 704 705 706 707 708
/*!
    \enum QRhiGraphicsShaderStage::Type
    Specifies the type of the shader stage.

    \value Vertex Vertex stage
    \value Fragment Fragment (pixel) stage
    \value TessellationControl Tessellation control (hull) stage
    \value TessellationEvaluation Tessellation evaluation (domain) stage
 */

709 710 711
/*!
    Constructs an empty shader stage description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
712 713 714
QRhiGraphicsShaderStage::QRhiGraphicsShaderStage()
{
}
715

716 717 718 719
/*!
    Constructs a shader stage description with the \a type of the stage and the
    \a shader.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
720 721 722 723 724
QRhiGraphicsShaderStage::QRhiGraphicsShaderStage(Type type, const QBakedShader &shader)
    : m_type(type),
      m_shader(shader)
{
}
Laszlo Agocs's avatar
Laszlo Agocs committed
725 726

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
727
    \class QRhiColorAttachment
Laszlo Agocs's avatar
Laszlo Agocs committed
728
    \inmodule QtRhi
729 730 731
    \brief Describes the a single color attachment of a render target.

    A color attachment is either a QRhiTexture or a QRhiRenderBuffer. The
Laszlo Agocs's avatar
Laszlo Agocs committed
732
    former, when texture() is set, is used in most cases.
733

Laszlo Agocs's avatar
Laszlo Agocs committed
734 735
    \note texture() and renderBuffer() cannot be both set (be non-null at the
    same time).
736 737 738 739 740 741 742 743

    Setting renderBuffer instead is recommended only when multisampling is
    needed. Relying on QRhi::MultisampleRenderBuffer is a better choice than
    QRhi::MultisampleTexture in practice since the former is available in more
    run time configurations (e.g. when running on OpenGL ES 3.0 which has no
    support for multisample textures, but does support multisample
    renderbuffers).

Laszlo Agocs's avatar
Laszlo Agocs committed
744
    When targeting a non-multisample texture, the layer() and level()
745 746 747
    indicate the targeted layer (face index \c{0-5} for cubemaps) and mip
    level.

Laszlo Agocs's avatar
Laszlo Agocs committed
748
    When texture() or renderBuffer() is multisample, resolveTexture() can be
749 750 751 752 753 754 755
    set optionally. When set, samples are resolved automatically into that
    (non-multisample) texture at the end of the render pass. When rendering
    into a multisample renderbuffers, this is the only way to get resolved,
    non-multisample content out of them. Multisample textures allow sampling in
    shaders so for them this is just one option.

    \note when resolving is enabled, the multisample data may not be written
Laszlo Agocs's avatar
Laszlo Agocs committed
756 757
    out at all. This means that the multisample texture() must not be used
    afterwards with shaders for sampling when resolveTexture() is set.
Laszlo Agocs's avatar
Laszlo Agocs committed
758 759
 */

760 761 762
/*!
    Constructs an empty color attachment description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
763 764 765 766
QRhiColorAttachment::QRhiColorAttachment()
{
}

767 768 769 770
/*!
    Constructs a color attachment description that specifies \a texture as the
    associated color buffer.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
771 772 773 774 775
QRhiColorAttachment::QRhiColorAttachment(QRhiTexture *texture)
    : m_texture(texture)
{
}

776 777 778 779
/*!
    Constructs a color attachment description that specifies \a renderBuffer as
    the associated color buffer.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797
QRhiColorAttachment::QRhiColorAttachment(QRhiRenderBuffer *renderBuffer)
    : m_renderBuffer(renderBuffer)
{
}

/*!
    \class QRhiTextureRenderTargetDescription
    \inmodule QtRhi
    \brief Describes the color and depth or depth/stencil attachments of a render target.

    A texture render target has zero or more textures as color attachments,
    zero or one renderbuffer as combined depth/stencil buffer or zero or one
    texture as depth buffer.

    \note depthStencilBuffer() and depthTexture() cannot be both set (cannot be
    non-null at the same time).
 */

798 799 800
/*!
    Constructs an empty texture render target description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
801 802 803 804
QRhiTextureRenderTargetDescription::QRhiTextureRenderTargetDescription()
{
}

805 806 807 808
/*!
    Constructs a texture render target description with one attachment
    described by \a colorAttachment.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
809 810 811 812 813
QRhiTextureRenderTargetDescription::QRhiTextureRenderTargetDescription(const QRhiColorAttachment &colorAttachment)
{
    m_colorAttachments.append(colorAttachment);
}

814 815 816 817 818
/*!
    Constructs a texture render target description with two attachments, a
    color attachment described by \a colorAttachment, and a depth/stencil
    attachment with \a depthStencilBuffer.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
819 820 821 822 823 824 825
QRhiTextureRenderTargetDescription::QRhiTextureRenderTargetDescription(const QRhiColorAttachment &colorAttachment,
                                                                       QRhiRenderBuffer *depthStencilBuffer)
    : m_depthStencilBuffer(depthStencilBuffer)
{
    m_colorAttachments.append(colorAttachment);
}

826 827 828 829 830 831 832 833
/*!
    Constructs a texture render target description with two attachments, a
    color attachment described by \a colorAttachment, and a depth attachment
    with \a depthTexture.

    \note \a depthTexture must have a suitable format, such as QRhiTexture::D16
    or QRhiTexture::D32.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869
QRhiTextureRenderTargetDescription::QRhiTextureRenderTargetDescription(const QRhiColorAttachment &colorAttachment,
                                                                       QRhiTexture *depthTexture)
    : m_depthTexture(depthTexture)
{
    m_colorAttachments.append(colorAttachment);
}

/*!
    \class QRhiTextureMipLevel
    \inmodule QtRhi
    \brief Describes one mip level in a layer in a texture upload operation.

    The source content is specified either as a QImage or as a raw blob. The
    former is only allowed for uncompressed textures, while the latter is only
    supported for compressed ones.

    \note image() and compressedData() cannot be both set at the same time.

    destinationTopLeft() specifies the top-left corner of the target
    rectangle. Defaults to (0, 0).

    An empty sourceSize() (the default) indicates that size is assumed to be
    the size of the subresource. For uncompressed textures this implies that
    the size of the source image() must match the subresource. For compressed
    textures sufficient amount of data must be provided in compressedData().

    \note With compressed textures the first upload must always match the
    subresource size due to graphics API limitations with some backends.

    sourceTopLeft() is is only supported for uncompressed textures, and
    specifies the top-left corner of the source rectangle.

    \note Setting sourceSize() or sourceTopLeft() may trigger a QImage copy
    internally, depending on the format and the backend.
 */

870 871 872
/*!
    Constructs an empty mip level description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
873 874 875 876
QRhiTextureMipLevel::QRhiTextureMipLevel()
{
}

877 878 879 880 881 882 883 884 885 886 887 888
/*!
    Constructs a mip level description with a \a image.

    The \l{QImage::size()}{size} of \a image must match the size of the mip
    level. For level 0 that is the \l{QRhiTexture::pixelSize()}{texture size}.

    The bit depth of \a image must be compatible with the
    \l{QRhiTexture::Format}{texture format}.

    To describe a partial upload, call setSourceSize(), setSourceTopLeft(), or
    setDestinationTopLeft() afterwards.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
889 890 891 892 893
QRhiTextureMipLevel::QRhiTextureMipLevel(const QImage &image)
    : m_image(image)
{
}

894 895 896 897
/*!
    Constructs a mip level description suitable for compressed textures. The
    compressed data is specified in \a compressedData.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
898 899 900 901 902 903 904 905 906 907 908
QRhiTextureMipLevel::QRhiTextureMipLevel(const QByteArray &compressedData)
    : m_compressedData(compressedData)
{
}

/*!
    \class QRhiTextureLayer
    \inmodule QtRhi
    \brief Describes one layer (face for cubemaps) in a texture upload operation.
 */

909 910 911
/*!
    Constructs an empty texture layer description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
912 913 914 915
QRhiTextureLayer::QRhiTextureLayer()
{
}

916 917 918 919
/*!
    Constructs a texture layer description with the specified list of \a
    mipImages.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
920 921 922 923 924
QRhiTextureLayer::QRhiTextureLayer(const QVector<QRhiTextureMipLevel> &mipImages)
    : m_mipImages(mipImages)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
925 926 927
/*!
    \class QRhiTextureUploadDescription
    \inmodule QtRhi
928
    \brief Describes a texture upload operation.
929

930 931 932 933 934 935 936 937
    Used with QRhiResourceUpdateBatch::uploadTexture(). That function has two
    variants: one taking a QImage and one taking a
    QRhiTextureUploadDescription. The former is a convenience version,
    internally creating a QRhiTextureUploadDescription with a single layer and
    a single image in that layer. However, when cubemaps, pre-generated mip
    images, or compressed textures are involved, applications will have to work
    directly with this class instead.

938 939
    \note Cubemaps have one layer for each of the six faces in the order +X,
    -X, +Y, -Y, +Z, -Z.
940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965

    For example, specifying the faces of a cubemap could look like the following:

    \badcode
        QImage faces[6];
        ...
        QVector<QRhiTextureLayer> layers;
        for (int i = 0; i < 6; ++i)
          layers.append(QRhiTextureLayer({ QRhiTextureMipLevel(faces[i]) });
        QRhiTextureUploadDescription desc(layers);
        resourceUpdates->uploadTexture(texture, desc);
    \endcode

    Another example that specifies mip images for a compressed texture:

    \badcode
        QVector<QRhiTextureMipLevel> mipImages;
        const int mipCount = rhi->mipLevelsForSize(compressedTexture->pixelSize());
        for (int level = 0; level < mipCount; ++level) {
            const QByteArray compressedDataForLevel = ...
            mipImages.append(QRhiTextureMipLevel(compressedDataForLevel));
        }
        QRhiTextureLayer layer(mipImages);
        QRhiTextureUploadDescription desc({ layer });
        resourceUpdates->uploadTexture(compressedTexture, desc);
    \endcode
Laszlo Agocs's avatar
Laszlo Agocs committed
966 967
 */

968 969 970
/*!
    Constructs an empty texture upload description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
971 972 973
QRhiTextureUploadDescription::QRhiTextureUploadDescription()
{
}
974

975 976 977 978
/*!
    Constructs a texture upload description with the specified list of \a
    layers.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
979 980 981 982
QRhiTextureUploadDescription::QRhiTextureUploadDescription(const QVector<QRhiTextureLayer> &layers)
    : m_layers(layers)
{
}
Laszlo Agocs's avatar
Laszlo Agocs committed
983 984 985 986

/*!
    \class QRhiTextureCopyDescription
    \inmodule QtRhi
987
    \brief Describes a texture-to-texture copy operation.
988

989 990 991
    An empty pixelSize() indicates that the entire subresource is to be copied.
    A default constructed copy description therefore leads to copying the
    entire subresource at level 0 of layer 0.
992 993 994

    \note The source texture must be created with
    QRhiTexture::UsedAsTransferSource.
995 996 997 998

    \note The source and destination rectangles defined by pixelSize(),
    sourceTopLeft(), and destinationTopLeft() must fit the source and
    destination textures, respectively. The behavior is undefined otherwise.
Laszlo Agocs's avatar
Laszlo Agocs committed
999 1000
 */

1001 1002 1003
/*!
    Constructs an empty texture copy description.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1004 1005 1006 1007
QRhiTextureCopyDescription::QRhiTextureCopyDescription()
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
1008 1009 1010
/*!
    \class QRhiReadbackDescription
    \inmodule QtRhi
1011
    \brief Describes a readback (reading back texture contents from possibly GPU-only memory) operation.
1012 1013

    The source of the readback operation is either a QRhiTexture or the
1014 1015
    current backbuffer of the currently targeted QRhiSwapChain. When
    texture() is not set, the swapchain is used. Otherwise the specified
1016 1017 1018 1019 1020 1021 1022 1023
    QRhiTexture is treated as the source.

    \note Textures used in readbacks must be created with
    QRhiTexture::UsedAsTransferSource.

    \note Swapchains used in readbacks must be created with
    QRhiSwapChain::UsedAsTransferSource.

1024
    layer() and level() are only applicable when the source is a QRhiTexture.
1025 1026 1027

    \note Multisample textures cannot be read back. Readbacks are supported for
    multisample swapchain buffers however.
Laszlo Agocs's avatar
Laszlo Agocs committed
1028 1029
 */

1030 1031 1032 1033 1034 1035 1036 1037 1038
/*!
    Constructs an empty texture readback description.

    \note The source texture is set to null by default, which is still a valid
    readback: it specifies that the backbuffer of the current swapchain is to
    be read back. (current meaning the frame's target swapchain at the time of
    committing the QRhiResourceUpdateBatch with the
    \l{QRhiResourceUpdateBatch::readBackTexture()}{texture readback} on it)
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1039 1040 1041 1042
QRhiReadbackDescription::QRhiReadbackDescription()
{
}

1043 1044 1045 1046 1047 1048 1049
/*!
    Constructs an texture readback description that specifies that level 0 of
    layer 0 of \a texture is to be read back.

    \note \a texture can also be null in which case this constructor is
    identical to the argumentless variant.
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1050 1051 1052 1053 1054
QRhiReadbackDescription::QRhiReadbackDescription(QRhiTexture *texture)
    : m_texture(texture)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
1055 1056 1057
/*!
    \class QRhiReadbackResult
    \inmodule QtRhi
1058
    \brief Describes the results of a potentially asynchronous readback operation.
1059 1060 1061 1062

    When \l completed is set, the function is invoked when the \l data is
    available. \l format and \l pixelSize are set upon completion together with
    \l data.
Laszlo Agocs's avatar
Laszlo Agocs committed
1063 1064 1065 1066 1067
 */

/*!
    \class QRhiNativeHandles
    \inmodule QtRhi
1068
    \brief Base class for classes exposing backend-specific collections of native resource objects.
Laszlo Agocs's avatar
Laszlo Agocs committed
1069 1070 1071 1072 1073
 */

/*!
    \class QRhiResource
    \inmodule QtRhi
1074
    \brief Base class for classes encapsulating native resource objects.
Laszlo Agocs's avatar
Laszlo Agocs committed
1075 1076 1077
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1078
    \internal
Laszlo Agocs's avatar
Laszlo Agocs committed
1079
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1080 1081 1082 1083
QRhiResource::QRhiResource(QRhiImplementation *rhi_)
    : rhi(rhi_)
{
}
Laszlo Agocs's avatar
Laszlo Agocs committed
1084

1085
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1086
   Destructor.
1087
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1088 1089 1090
QRhiResource::~QRhiResource()
{
}
1091

Laszlo Agocs's avatar
Laszlo Agocs committed
1092
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1093
    \fn void QRhiResource::release()
Laszlo Agocs's avatar
Laszlo Agocs committed
1094

Laszlo Agocs's avatar
Laszlo Agocs committed
1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163
    Releases the underlying native graphics resources. Safe to call multiple
    times, subsequent invocations will be a no-op then.

    Once release() is called, the QRhiResource instance can be reused, by
    calling the appropriate \c build() function again, or destroyed.
 */

/*!
    Releases native graphics resources, if there is any, and destroys the
    QRhiResource. Equivalent to \c{r->release(); delete r; }.
 */
void QRhiResource::releaseAndDestroy()
{
    release();
    delete this;
}

/*!
    \return the currently set object name. By default the name is empty.
 */
QByteArray QRhiResource::name() const
{
    return objectName;
}

/*!
    Sets a \a name for the object.

    This has two uses: to get descriptive names for the native graphics
    resources visible in graphics debugging tools, such as
    \l{https://renderdoc.org/}{RenderDoc} and
    \l{https://developer.apple.com/xcode/}{XCode}, and in the output stream of
    QRhiProfiler.

    When it comes to naming native objects by relaying the name via the
    appropriate graphics API, note that the name is ignored when
    QRhi::DebugMarkers are not supported, and may, depending on the backend,
    also be ignored when QRhi::EnableDebugMarkers is not set.

    \note The name may be ignored for objects other than buffers,
    renderbuffers, and textures, depending on the backend.

    \note The name may be modified. For slotted resources, such as a QRhiBuffer
    backed by multiple native buffers, QRhi will append a suffix to make the
    underlying native buffers easily distinguishable from each other.
 */
void QRhiResource::setName(const QByteArray &name)
{
    objectName = name;
    objectName.replace(',', '_'); // cannot contain comma for QRhiProfiler
}

/*!
    \class QRhiBuffer
    \inmodule QtRhi
    \brief Vertex, index, or uniform (constant) buffer resource.
 */

/*!
    \enum QRhiBuffer::Type
    Specifies type of buffer resource.

    \value Immutable Indicates that the data is not expected to change ever
    after the initial upload. Under the hood such buffer resources are
    typically placed in device local (GPU) memory (on systems where
    applicable). Uploading new data is possible, but frequent changes can be
    expensive. Upload typically happens by copying to a separate, host visible
    staging buffer from which a GPU buffer-to-buffer copy is issued into the
    actual GPU-only buffer.
Laszlo Agocs's avatar
Laszlo Agocs committed
1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187

    \value Static Indicates that the data is expected to change only
    infrequently. Typically placed in device local (GPU) memory, where
    applicable. On backends where host visible staging buffers are used for
    uploading, the staging buffers are kept around for this type, unlike with
    Immutable, so subsequent uploads do not suffer in performance. Frequent
    updates should be avoided.

    \value Dynamic Indicates that the data is expected to change frequently.
    Not recommended for large buffers. Typically backed by host visible memory
    in 2 copies in order to allow for changing without stalling the graphics
    pipeline. The double buffering is managed transparently to the applications
    and is not exposed in the API here in any form.
 */

/*!
    \enum QRhiBuffer::UsageFlag
    Flag values to specify how the buffer is going to be used.

    \value VertexBuffer Vertex buffer
    \value IndexBuffer Index buffer
    \value UniformBuffer Uniform (constant) buffer
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283
/*!
    \fn void QRhiBuffer::setSize(int sz)

    Sets the size of the buffer in bytes. The size is normally specified in
    QRhi::newBuffer() so this function is only used when the size has to be
    changed. As with other setters, the size only takes effect when calling
    build(), and for already built buffers this involves releasing the previous
    native resource and creating new ones under the hood.

    Backends may choose to allocate buffers bigger than \a sz in order to
    fulfill alignment requirements. This is hidden from the applications and
    size() will always report the size requested in \a sz.
 */

/*!
    \internal
 */
QRhiBuffer::QRhiBuffer(QRhiImplementation *rhi, Type type_, UsageFlags usage_, int size_)
    : QRhiResource(rhi),
      m_type(type_), m_usage(usage_), m_size(size_)
{
}

/*!
    \fn bool QRhiBuffer::build()

    Creates the corresponding native graphics resources. If there are already
    resources present due to an earlier build() with no corresponding
    release(), then release() is called implicitly first.

    \return \c true when successful, \c false when a graphics operation failed.
    Regardless of the return value, calling release() is always safe.
 */

/*!
    \class QRhiRenderBuffer
    \inmodule QtRhi
    \brief Renderbuffer resource.

    Renderbuffers cannot be sampled or read but have some benefits over
    textures in some cases:

    A DepthStencil renderbuffer may be lazily allocated and be backed by
    transient memory with some APIs. On some platforms this may mean the
    depth/stencil buffer uses no physical backing at all.

    Color renderbuffers are useful since QRhi::MultisampleRenderBuffer may be
    supported even when QRhi::MultisampleTexture is not.

    How the renderbuffer is implemented by a backend is not exposed to the
    applications. In some cases it may be backed by ordinary textures, while in
    others there may be a different kind of native resource used.
 */

/*!
    \enum QRhiRenderBuffer::Type
    Specifies the type of the renderbuffer

    \value DepthStencil Combined depth/stencil
    \value Color Color
 */

/*!
    \enum QRhiRenderBuffer::Flag
    Flag values for flags() and setFlags()

    \value UsedWithSwapChainOnly For DepthStencil renderbuffers this indicates
    that the renderbuffer is only used in combination with a QRhiSwapChain and
    never in other ways. Relevant with some backends, while others ignore it.
    With OpenGL where a separate windowing system interface API is in use (EGL,
    GLX, etc.), the flag is important since it avoids creating any actual
    resource as there is already a windowing system provided depth/stencil
    buffer as requested by QSurfaceFormat.
 */

/*!
    \internal
 */
QRhiRenderBuffer::QRhiRenderBuffer(QRhiImplementation *rhi, Type type_, const QSize &pixelSize_,
                                   int sampleCount_, Flags flags_)
    : QRhiResource(rhi),
      m_type(type_), m_pixelSize(pixelSize_), m_sampleCount(sampleCount_), m_flags(flags_)
{
}

/*!
    \fn bool QRhiRenderBuffer::build()

    Creates the corresponding native graphics resources. If there are already
    resources present due to an earlier build() with no corresponding
    release(), then release() is called implicitly first.

    \return \c true when successful, \c false when a graphics operation failed.
    Regardless of the return value, calling release() is always safe.
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1284 1285 1286
/*!
    \class QRhiTexture
    \inmodule QtRhi
1287
    \brief Texture resource.
Laszlo Agocs's avatar
Laszlo Agocs committed
1288 1289
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365
/*!
    \enum QRhiTexture::Flag

    Flag values to specify how the texture is going to be used. Not honoring
    the flags set before build() and attempting to use the texture in ways that
    was not declared upfront can lead to unspecified behavior or decreased
    performance depending on the backend and the underlying graphics API.

    \value RenderTarget The texture going to be used in combination with
    QRhiTextureRenderTarget

    \value ChangesFrequently Performance hint to indicate that the texture
    contents will change frequently and so staging buffers, if any, are to be
    kept alive to avoid performance hits

    \value CubeMap The texture is a cubemap. Such textures have 6 layers, one
    for each face in the order of +X, -X, +Y, -Y, +Z, -Z. Cubemap textures
    cannot be multisample.

     \value MipMapped The texture has mipmaps. The appropriate mip count is
     calculated automatically and can also be retrieved via
     QRhi::mipLevelsForSize(). The images for the mip levels have to be
     provided in the texture uploaded or generated via
     QRhiResourceUpdateBatch::generateMips(). Multisample textures cannot have
     mipmaps.

    \value sRGB Use an sRGB format

    \value UsedAsTransferSource The texture is used as the source of a texture
    copy or readback, meaning the texture is given as the source in
    QRhiResourceUpdateBatch::copyTexture() or
    QRhiResourceUpdateBatch::readBackTexture().

     \value UsedWithGenerateMips The texture is going to be used with
     QRhiResourceUpdateBatch::generateMips().
 */

/*!
    \enum QRhiTexture::Format

    Specifies the texture format. See also QRhi::isTextureFormatSupported() and
    note that flags() can modify the format when QRhiTexture::sRGB is set.

    \value UnknownFormat Not a valid format. This cannot be passed to setFormat().
    \value RGBA8
    \value BGRA8
    \value R8
    \value R16
    \value D16
    \value D32
    \value BC1
    \value BC2
    \value BC3
    \value BC4
    \value BC5
    \value BC6H
    \value BC7
    \value ETC2_RGB8
    \value ETC2_RGB8A1
    \value ETC2_RGBA8
    \value ASTC_4x4
    \value ASTC_5x4
    \value ASTC_5x5
    \value ASTC_6x5
    \value ASTC_6x6
    \value ASTC_8x5
    \value ASTC_8x6
    \value ASTC_8x8
    \value ASTC_10x5
    \value ASTC_10x6
    \value ASTC_10x8
    \value ASTC_10x10
    \value ASTC_12x10
    \value ASTC_12x12
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428
/*!
    \internal
 */
QRhiTexture::QRhiTexture(QRhiImplementation *rhi, Format format_, const QSize &pixelSize_,
                         int sampleCount_, Flags flags_)
    : QRhiResource(rhi),
      m_format(format_), m_pixelSize(pixelSize_), m_sampleCount(sampleCount_), m_flags(flags_)
{
}

/*!
    \fn bool QRhiTexture::build()

    Creates the corresponding native graphics resources. If there are already
    resources present due to an earlier build() with no corresponding
    release(), then release() is called implicitly first.

    \return \c true when successful, \c false when a graphics operation failed.
    Regardless of the return value, calling release() is always safe.
 */

/*!
    \return a pointer to a backend-specific QRhiNativeHandles subclass, such as
    QRhiVulkanTextureNativeHandles. The returned value is null when exposing
    the underlying native resources is not supported by the backend.

    \sa QRhiVulkanTextureNativeHandles, QRhiD3D11TextureNativeHandles,
    QRhiMetalTextureNativeHandles, QRhiGles2TextureNativeHandles
 */
const QRhiNativeHandles *QRhiTexture::nativeHandles()
{
    return nullptr;
}

/*!
    Similar to build() except that no new native textures are created. Instead,
    the texture from \a src is used.

    This allows importing an existing native texture object (which must belong
    to the same device or sharing context, depending on the graphics API) from
    an external graphics engine.

    \note format(), pixelSize(), sampleCount(), and flags() must still be set
    correctly. Passing incorrect sizes and other values to QRhi::newTexture()
    and then following it with a buildFrom() expecting that the native texture
    object alone is sufficient to deduce such values is \b wrong and will lead
    to problems.

    \note QRhiTexture does not take ownership of the texture object. release()
    does not free the object or any associated memory.

    The opposite of this operation, exposing a QRhiTexture-created native
    texture object to a foreign engine, is possible via nativeHandles().

    \sa QRhiVulkanTextureNativeHandles, QRhiD3D11TextureNativeHandles,
    QRhiMetalTextureNativeHandles, QRhiGles2TextureNativeHandles
 */
bool QRhiTexture::buildFrom(const QRhiNativeHandles *src)
{
    Q_UNUSED(src);
    return false;
}

Laszlo Agocs's avatar
Laszlo Agocs committed
1429 1430 1431
/*!
    \class QRhiSampler
    \inmodule QtRhi
1432
    \brief Sampler resource.
Laszlo Agocs's avatar
Laszlo Agocs committed
1433 1434
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454
/*!
    \enum QRhiSampler::Filter
    Specifies the minification, magnification, or mipmap filtering

    \value None Applicable only for mipmapMode(), indicates no mipmaps to be used
    \value Nearest
    \value Linear
 */

/*!
    \enum QRhiSampler::AddressMode
    Specifies the addressing mode

    \value Repeat
    \value ClampToEdge
    \value Border
    \value Mirror
    \value MirrorOnce
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1455
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1456 1457 1458 1459 1460 1461 1462 1463 1464 1465
    \internal
 */
QRhiSampler::QRhiSampler(QRhiImplementation *rhi,
                         Filter magFilter_, Filter minFilter_, Filter mipmapMode_,
                         AddressMode u_, AddressMode v_, AddressMode w_)
    : QRhiResource(rhi),
      m_magFilter(magFilter_), m_minFilter(minFilter_), m_mipmapMode(mipmapMode_),
      m_addressU(u_), m_addressV(v_), m_addressW(w_)
{
}
1466

Laszlo Agocs's avatar
Laszlo Agocs committed
1467 1468 1469 1470
/*!
    \class QRhiRenderPassDescriptor
    \inmodule QtRhi
    \brief Render pass resource.
Laszlo Agocs's avatar
Laszlo Agocs committed
1471 1472
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1473
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1474
    \internal
Laszlo Agocs's avatar
Laszlo Agocs committed
1475
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1476 1477 1478 1479
QRhiRenderPassDescriptor::QRhiRenderPassDescriptor(QRhiImplementation *rhi)
    : QRhiResource(rhi)
{
}
Laszlo Agocs's avatar
Laszlo Agocs committed
1480 1481 1482 1483

/*!
    \class QRhiRenderTarget
    \inmodule QtRhi
1484
    \brief Represents an onscreen (swapchain) or offscreen (texture) render target.
Laszlo Agocs's avatar
Laszlo Agocs committed
1485 1486
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1487 1488 1489 1490 1491 1492 1493 1494 1495 1496
/*!
    \enum QRhiRenderTarget::Type
    Specifies the type of the render target

    \value RtRef This is a reference to another resource's buffer(s). Used by
    targets returned from QRhiSwapChain::currentFrameRenderTarget().

    \value RtTexture This is a QRhiTextureRenderTarget.
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533
/*!
    \internal
 */
QRhiRenderTarget::QRhiRenderTarget(QRhiImplementation *rhi)
    : QRhiResource(rhi)
{
}

/*!
    \fn QRhiRenderTarget::Type QRhiRenderTarget::type() const

    \return the type of the render target.
 */

/*!
    \fn QSize QRhiRenderTarget::sizeInPixels() const

    \return the size in pixels.
 */

/*!
    \fn float QRhiRenderTarget::devicePixelRatio() const

    \return the device pixel ratio. For QRhiTextureRenderTarget this is always
    1. For targets retrieved from a QRhiSwapChain the value reflects the
    \l{QWindow::devicePixelRatio()}{device pixel ratio} of the targeted
    QWindow.
 */

/*!
    \internal
 */
QRhiReferenceRenderTarget::QRhiReferenceRenderTarget(QRhiImplementation *rhi)
    : QRhiRenderTarget(rhi)
{
}

Laszlo Agocs's avatar
Laszlo Agocs committed
1534 1535 1536
/*!
    \class QRhiTextureRenderTarget
    \inmodule QtRhi
1537
    \brief Texture render target resource.
1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556

    A texture render target allows rendering into one or more textures,
    optionally with a depth texture or depth/stencil renderbuffer.

    \note Textures used in combination with QRhiTextureRenderTarget must be
    created with the QRhiTexture::RenderTarget flag.

    The simplest example of creating a render target with a texture as its
    single color attachment:

    \badcode
        texture = rhi->newTexture(QRhiTexture::RGBA8, size, 1, QRhiTexture::RenderTarget);
        texture->build();
        rt = rhi->newTextureRenderTarget({ texture });
        rp = rt->newCompatibleRenderPassDescriptor();
        rt->setRenderPassDescriptor(rt);
        rt->build();
        // rt can now be used with beginPass()
    \endcode
Laszlo Agocs's avatar
Laszlo Agocs committed
1557 1558
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1559 1560
/*!
    \enum QRhiTextureRenderTarget::Flag
1561 1562 1563 1564 1565 1566

    Flag values describing the load/store behavior for the render target. The
    load/store behavior may be baked into native resources under the hood,
    depending on the backend, and therefore it needs to be known upfront and
    cannot be changed without rebuilding (and so releasing and creating new
    native resources).
Laszlo Agocs's avatar
Laszlo Agocs committed
1567 1568 1569 1570 1571 1572 1573 1574 1575

    \value PreserveColorContents Indicates that the contents of the color
    attachments is to be loaded when starting a render pass, instead of
    clearing. This is potentially more expensive, especially on mobile (tiled)
    GPUs, but allows preserving the existing contents between passes.

    \value PreserveDepthStencilContents Indicates that the contents of the
    depth texture is to be loaded when starting a render pass, instead
    clearing. Only applicable when a texture is used as the depth buffer
Laszlo Agocs's avatar
Laszlo Agocs committed
1576
    (QRhiTextureRenderTargetDescription::depthTexture() is set) because
Laszlo Agocs's avatar
Laszlo Agocs committed
1577 1578 1579 1580
    depth/stencil renderbuffers may not have any physical backing and data may
    not be written out in the first place.
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642
/*!
    \internal
 */
QRhiTextureRenderTarget::QRhiTextureRenderTarget(QRhiImplementation *rhi,
                                                 const QRhiTextureRenderTargetDescription &desc_,
                                                 Flags flags_)
    : QRhiRenderTarget(rhi),
      m_desc(desc_),
      m_flags(flags_)
{
}

/*!
    \fn QRhiRenderPassDescriptor *QRhiTextureRenderTarget::newCompatibleRenderPassDescriptor()

    \return a new QRhiRenderPassDescriptor that is compatible with this render
    target.

    The returned value is used in two ways: it can be passed to
    setRenderPassDescriptor() and
    QRhiGraphicsPipeline::setRenderPassDescriptor(). A render pass descriptor
    describes the attachments (color, depth/stencil) and the load/store
    behavior that can be affected by flags(). A QRhiGraphicsPipeline can only
    be used in combination with a render target that has the same
    QRhiRenderPassDescriptor set.

    Two QRhiTextureRenderTarget instances can share the same render pass
    descriptor as long as they have the same number and type of attachments.
    The associated QRhiTexture or QRhiRenderBuffer instances are not part of
    the render pass descriptor so those can differ in the two
    QRhiTextureRenderTarget intances.

    \note resources, such as QRhiTexture instances, referenced in description()
    must already be built

    \sa build()
 */

/*!
    \fn bool QRhiTextureRenderTarget::build()

    Creates the corresponding native graphics resources. If there are already
    resources present due to an earlier build() with no corresponding
    release(), then release() is called implicitly first.

    \note renderPassDescriptor() must be set before calling build(). To obtain
    a QRhiRenderPassDescriptor compatible with the render target, call
    newCompatibleRenderPassDescriptor() before build() but after setting all
    other parameters, such as description() and flags(). To save resources,
    reuse the same QRhiRenderPassDescriptor with multiple
    QRhiTextureRenderTarget instances, whenever possible. Sharing the same
    render pass descriptor is only possible when the render targets have the
    same number and type of attachments (the actual textures can differ) and
    the same flags.

    \note resources, such as QRhiTexture instances, referenced in description()
    must already be built

    \return \c true when successful, \c false when a graphics operation failed.
    Regardless of the return value, calling release() is always safe.
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1643 1644 1645
/*!
    \class QRhiShaderResourceBindings
    \inmodule QtRhi
1646
    \brief Encapsulates resources for making buffer, texture, sampler resources visible to shaders.
Laszlo Agocs's avatar
Laszlo Agocs committed
1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704

    A QRhiShaderResourceBindings is a collection of QRhiShaderResourceBinding
    instances, each of which describe a single binding.

    Take a fragment shader with the following interface:

    \badcode
        layout(std140, binding = 0) uniform buf {
            mat4 mvp;
            int flip;
        } ubuf;

        layout(binding = 1) uniform sampler2D tex;
    \endcode

    To make resources visible to the shader, the following
    QRhiShaderResourceBindings could be created and then passed to
    QRhiGraphicsPipeline::setShaderResourceBindings():

    \badcode
        srb = rhi->newShaderResourceBindings();
        srb->setBindings({
            QRhiShaderResourceBinding::uniformBuffer(0, QRhiShaderResourceBinding::VertexStage | QRhiShaderResourceBinding::FragmentStage, ubuf),
            QRhiShaderResourceBinding::sampledTexture(1, QRhiShaderResourceBinding::FragmentStage, texture, sampler)
        });
        srb->build();
        ...
        ps = rhi->newGraphicsPipeline();
        ...
        ps->setShaderResourceBindings(srb);
        ps->build();
        ...
        cb->setGraphicsPipeline(ps);
    \endcode

    This assumes that \c ubuf is a QRhiBuffer, \c texture is a QRhiTexture,
    while \a sampler is a QRhiSampler. The example also assumes that the
    uniform block is present in the vertex shader as well so the same buffer is
    made visible to the vertex stage too.

    \section3 Advanced usage

    Building on the above example, let's assume that a pass now needs to use
    the exact same pipeline and shaders with a different texture. Creating a
    whole separate QRhiGraphicsPipeline just for this would be an overkill.
    This is why QRhiCommandBuffer::setGraphicsPipeline() allows specifying an
    optional \a srb argument. As long as the layouts (so the number of bindings
    and the binding points) match between two QRhiShaderResourceBindings, they
    can both be used with the same pipeline, assuming the pipeline was built
    with one of them in the first place.

    Creating and then using a new \c srb2 that is very similar to \c srb with
    the exception of referencing another texture could be implemented like the
    following:

    \badcode
        srb2 = rhi->newShaderResourceBindings();
        QVector<QRhiShaderResourceBinding> bindings = srb->bindings();
Laszlo Agocs's avatar
Laszlo Agocs committed
1705
        bindings[1] = QRhiShaderResourceBinding::sampledTexture(1, QRhiShaderResourceBinding::FragmentStage, anotherTexture, sampler);
Laszlo Agocs's avatar
Laszlo Agocs committed
1706 1707 1708 1709 1710
        srb2->setBindings(bindings);
        srb2->build();
        ...
        cb->setGraphicsPipeline(ps, srb2);
    \endcode
Laszlo Agocs's avatar
Laszlo Agocs committed
1711 1712 1713
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1714
    \internal
1715
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1716 1717 1718 1719
QRhiShaderResourceBindings::QRhiShaderResourceBindings(QRhiImplementation *rhi)
    : QRhiResource(rhi)
{
}
1720 1721

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1722 1723 1724
    \class QRhiShaderResourceBinding
    \inmodule QtRhi
    \brief Specifies the shader resources that are made visible to one or more shader stages.
1725

Laszlo Agocs's avatar
Laszlo Agocs committed
1726 1727
    A QRhiShaderResourceBinding cannot be constructed directly. Instead, use
    the static functions uniformBuffer(), sampledTexture() to get an instance.
Laszlo Agocs's avatar
Laszlo Agocs committed
1728 1729
 */

Laszlo Agocs's avatar
Laszlo Agocs committed
1730
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1731 1732
    \enum QRhiShaderResourceBinding::Type
    Specifies type of the shader resource bound to a binding point
Laszlo Agocs's avatar
Laszlo Agocs committed
1733

Laszlo Agocs's avatar
Laszlo Agocs committed
1734 1735
    \value UniformBuffer Uniform buffer
    \value SampledTexture Combined image sampler
Laszlo Agocs's avatar
Laszlo Agocs committed
1736 1737 1738
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1739 1740
    \enum QRhiShaderResourceBinding::StageFlag
    Flag values to indicate which stages the shader resource is visible in
Laszlo Agocs's avatar
Laszlo Agocs committed
1741

Laszlo Agocs's avatar
Laszlo Agocs committed
1742 1743 1744 1745
    \value VertexStage Vertex stage
    \value FragmentStage Fragment (pixel) stage
    \value TessellationControlStage Tessellation control (hull) stage
    \value TessellationEvaluationStage Tessellation evaluation (domain) stage
Laszlo Agocs's avatar
Laszlo Agocs committed
1746 1747 1748
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1749
    \internal
Laszlo Agocs's avatar
Laszlo Agocs committed
1750
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1751 1752 1753 1754
QRhiShaderResourceBinding::QRhiShaderResourceBinding()
    : d(new QRhiShaderResourceBindingPrivate)
{
}
Laszlo Agocs's avatar
Laszlo Agocs committed
1755 1756

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1757
    \internal
Laszlo Agocs's avatar
Laszlo Agocs committed
1758
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1759 1760 1761 1762 1763 1764 1765 1766 1767
void QRhiShaderResourceBinding::detach()
{
    if (d->ref.load() != 1) {
        QRhiShaderResourceBindingPrivate *newd = new QRhiShaderResourceBindingPrivate(d);
        if (!d->ref.deref())
            delete d;
        d = newd;
    }
}
Laszlo Agocs's avatar
Laszlo Agocs committed
1768 1769

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1770 1771 1772 1773 1774 1775 1776
    \internal
 */
QRhiShaderResourceBinding::QRhiShaderResourceBinding(const QRhiShaderResourceBinding &other)
{
    d = other.d;
    d->ref.ref();
}
Laszlo Agocs's avatar
Laszlo Agocs committed
1777

Laszlo Agocs's avatar
Laszlo Agocs committed
1778 1779
/*!
    \internal
Laszlo Agocs's avatar
Laszlo Agocs committed
1780
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1781 1782 1783 1784 1785 1786 1787 1788 1789 1790
QRhiShaderResourceBinding &QRhiShaderResourceBinding::operator=(const QRhiShaderResourceBinding &other)
{
    if (d != other.d) {
        other.d->ref.ref();
        if (!d->ref.deref())
            delete d;
        d = other.d;
    }
    return *this;
}
Laszlo Agocs's avatar
Laszlo Agocs committed
1791 1792

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1793 1794 1795 1796 1797 1798 1799
    Destructor.
 */
QRhiShaderResourceBinding::~QRhiShaderResourceBinding()
{
    if (!d->ref.deref())
        delete d;
}
1800

1801
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1802 1803
    \return a shader resource binding for the given binding number, pipeline
    stage, and buffer specified by \a binding, \a stage, and \a buf.
1804
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1805 1806
QRhiShaderResourceBinding QRhiShaderResourceBinding::uniformBuffer(
        int binding, StageFlags stage, QRhiBuffer *buf)
1807
{
Laszlo Agocs's avatar
Laszlo Agocs committed
1808 1809 1810 1811 1812 1813 1814 1815 1816 1817
    QRhiShaderResourceBinding b;
    QRhiShaderResourceBindingPrivate *d = QRhiShaderResourceBindingPrivate::get(&b);
    Q_ASSERT(d->ref.load() == 1);
    d->binding = binding;
    d->stage = stage;
    d->type = UniformBuffer;
    d->u.ubuf.buf = buf;
    d->u.ubuf.offset = 0;
    d->u.ubuf.maybeSize = 0; // entire buffer
    return b;
1818 1819
}

1820
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1821 1822 1823
    \return a shader resource binding for the given binding number, pipeline
    stage, and buffer specified by \a binding, \a stage, and \a buf. This
    overload binds a region only, as specified by \a offset and \a size.
1824

Laszlo Agocs's avatar
Laszlo Agocs committed
1825 1826
    \note It is up to the user to ensure the offset is aligned to
    QRhi::ubufAlignment().
1827
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1828 1829
QRhiShaderResourceBinding QRhiShaderResourceBinding::uniformBuffer(
        int binding, StageFlags stage, QRhiBuffer *buf, int offset, int size)
1830
{
Laszlo Agocs's avatar
Laszlo Agocs committed
1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841
    Q_ASSERT(size > 0);
    QRhiShaderResourceBinding b;
    QRhiShaderResourceBindingPrivate *d = QRhiShaderResourceBindingPrivate::get(&b);
    Q_ASSERT(d->ref.load() == 1);
    d->binding = binding;
    d->stage = stage;
    d->type = UniformBuffer;
    d->u.ubuf.buf = buf;
    d->u.ubuf.offset = offset;
    d->u.ubuf.maybeSize = size;
    return b;
1842 1843
}

1844
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1845 1846 1847
    \return a shader resource binding for the given binding number, pipeline
    stage, texture, and sampler specified by \a binding, \a stage, \a tex,
    \a sampler.
1848
 */
Laszlo Agocs's avatar
Laszlo Agocs committed
1849 1850
QRhiShaderResourceBinding QRhiShaderResourceBinding::sampledTexture(
        int binding, StageFlags stage, QRhiTexture *tex, QRhiSampler *sampler)
1851
{
Laszlo Agocs's avatar
Laszlo Agocs committed
1852 1853 1854 1855 1856 1857 1858 1859 1860
    QRhiShaderResourceBinding b;
    QRhiShaderResourceBindingPrivate *d = QRhiShaderResourceBindingPrivate::get(&b);
    Q_ASSERT(d->ref.load() == 1);
    d->binding = binding;
    d->stage = stage;
    d->type = SampledTexture;
    d->u.stex.tex = tex;
    d->u.stex.sampler = sampler;
    return b;
1861 1862
}

1863
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1864 1865 1866
    \class QRhiGraphicsPipeline
    \inmodule QtRhi
    \brief Graphics pipeline state resource.
1867

Laszlo Agocs's avatar
Laszlo Agocs committed
1868 1869 1870
    \note Setting the shader resource bindings is mandatory. The referenced
    QRhiShaderResourceBindings must already be built by the time build() is
    called.
1871

Laszlo Agocs's avatar
Laszlo Agocs committed
1872 1873 1874 1875
    \note Setting the render pass descriptor is mandatory. To obtain a
    QRhiRenderPassDescriptor that can be passed to setRenderPassDescriptor(),
    use either QRhiTextureRenderTarget::newCompatibleRenderPassDescriptor() or
    QRhiSwapChain::newCompatibleRenderPassDescriptor().
1876

Laszlo Agocs's avatar
Laszlo Agocs committed
1877
    \note Setting the vertex input layout is mandatory.
1878

Laszlo Agocs's avatar
Laszlo Agocs committed
1879
    \note Setting the shader stages is mandatory.
1880

Laszlo Agocs's avatar
Laszlo Agocs committed
1881 1882
    \note sampleCount() defaults to 1 and must match the sample count of the
    render target's color and depth stencil attachments.
1883

Laszlo Agocs's avatar
Laszlo Agocs committed
1884 1885
    \note The depth test, depth write, and stencil test are disabled by
    default.
1886

Laszlo Agocs's avatar
Laszlo Agocs committed
1887 1888
    \note stencilReadMask() and stencilWriteMask() apply to both faces. They
    both default to 0xFF.
1889
 */
1890

1891
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1892 1893 1894 1895 1896 1897 1898
    \fn void QRhiGraphicsPipeline::setTargetBlends(const QVector<TargetBlend> &blends)

    Sets the blend specification for color attachments. Each element in \a
    blends corresponds to a color attachment of the render target.

    By default no blends are set, which is a shortcut to disabling blending and
    enabling color write for all four channels.
1899
 */
1900

1901
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1902
    \enum QRhiGraphicsPipeline::Flag
1903

Laszlo Agocs's avatar
Laszlo Agocs committed
1904
    Flag values for describing the dynamic state of the pipeline. The viewport is always dynamic.
1905

Laszlo Agocs's avatar
Laszlo Agocs committed
1906 1907
    \value UsesBlendConstants Indicates that a blend color constant will be set
    via QRhiCommandBuffer::setBlendConstants()
1908

Laszlo Agocs's avatar
Laszlo Agocs committed
1909 1910
    \value UsesStencilRef Indicates that a stencil reference value will be set
    via QRhiCommandBuffer::setStencilRef()
1911

Laszlo Agocs's avatar
Laszlo Agocs committed
1912 1913
    \value UsesScissor Indicates that a scissor rectangle will be set via
    QRhiCommandBuffer::setScissor()
1914 1915 1916
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1917 1918
    \enum QRhiGraphicsPipeline::Topology
    Specifies the primitive topology
1919

Laszlo Agocs's avatar
Laszlo Agocs committed
1920 1921 1922 1923 1924
    \value Triangles (default)
    \value TriangleStrip
    \value Lines
    \value LineStrip
    \value Points
1925 1926 1927
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1928 1929 1930 1931 1932 1933
    \enum QRhiGraphicsPipeline::CullMode
    Specifies the culling mode

    \value None No culling (default)
    \value Front Cull front faces
    \value Back Cull back faces
1934
 */
1935

Laszlo Agocs's avatar
Laszlo Agocs committed
1936
/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1937 1938 1939 1940 1941
    \enum QRhiGraphicsPipeline::FrontFace
    Specifies the front face winding order

    \value CCW Counter clockwise (default)
    \value CW Clockwise
1942 1943 1944
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1945 1946 1947 1948 1949 1950 1951
    \enum QRhiGraphicsPipeline::ColorMaskComponent
    Flag values for specifying the color write mask

    \value R
    \value G
    \value B
    \value A
1952 1953 1954
 */

/*!
Laszlo Agocs's avatar
Laszlo Agocs committed
1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976
    \enum QRhiGraphicsPipeline::BlendFactor
    Specifies the blend factor

    \value Zero
    \value One
    \value SrcColor
    \value OneMinusSrcColor
    \value DstColor
    \value OneMinusDstColor
    \value SrcAlpha
    \value OneMinusSrcAlpha
    \value DstAlpha
    \value OneMinusDstAlpha
    \value ConstantColor
    \value OneMinusConstantColor
    \value ConstantAlpha
    \value OneMinusConstantAlpha
    \value SrcAlphaSaturate
    \value Src1Color
    \value OneMinusSrc1Color
    \value Src1Alpha
    \value OneMinusSrc1Alpha
1977 1978 1979
 */

/*!