Skip to content

GitLab

Commit 1f8c8353 authored by Leena Miettinen's avatar Leena Miettinen Committed by Eike Ziller
Browse files

Doc: replace "targets" with "devices" or "target platforms" 



Try to make the terminology more consistent, where possible.

Change-Id: Ic3f86fcffe845f9a118bb2ee630e706e832e8e05
Reviewed-by: default avatarEike Ziller <eike.ziller@nokia.com>
parent 77288af6
Hide whitespace changes
Inline Side-by-side
Showing with 54 additions and 61 deletions
doc/src/debugger/qtquick-debugging.qdoc
View file @ 1f8c8353
......@@ -89,7 +89,7 @@
\o To debug applications on devices, check that Qt 4.7.4, or later,
libraries are installed on the device and
\l{Running on Multiple Targets}{select the corresponding kit for the device}
\l{Running on Multiple Platforms}{select the corresponding kit for the device}
before you start debugging.
\endlist
......
doc/src/linux-mobile/linuxdev.qdoc
View file @ 1f8c8353
......@@ -36,7 +36,7 @@
build and run applications on embedded Linux devices.
To be able to run and debug applications on embedded Linux devices, you must
create device configurations and select them in the \QC \l{glossary-buildandrun-kit}{kit}
add devices and select them in the \QC \l{glossary-buildandrun-kit}{kit}.
You use a wizard to create the connections. You can edit the settings later
in \gui Tools > \gui Options > \gui Devices.
......
doc/src/linux-mobile/maemodev.qdoc
View file @ 1f8c8353
......@@ -224,7 +224,7 @@
You use a wizard to create the connections. You can edit the settings later
in \gui Tools > \gui Options > \gui Devices.
\image qtcreator-maemo-device-configurations.png "Maemo Device Configurations dialog"
\image qtcreator-maemo-device-configurations.png "Devices dialog"
By default, you create the connection as the \e developer user. This
protects real user data on the device from getting corrupted during
......@@ -286,7 +286,7 @@
\o Select \gui {Maemo5/Fremantle} > \gui {Start Wizard}.
\image qtcreator-dev-conf-maemo.png "Maemo device configuration"
\image qtcreator-dev-conf-maemo.png "Maemo device"
\o In the \gui {The name to identify this configuration} field,
enter a name for the connection.
......
doc/src/linux-mobile/meegodev.qdoc
View file @ 1f8c8353
......@@ -237,7 +237,7 @@
You use a wizard to create the connections. You can edit the settings later
in \gui Tools > \gui Options > \gui Devices.
\image qtcreator-meego-device-configurations.png "MeeGo Device Configurations dialog"
\image qtcreator-meego-device-configurations.png "Devices dialog"
By default, you create the connection as the \e developer user. This
protects real user data on the device from getting corrupted during testing.
......
doc/src/overview/creator-deployment-overview.qdoc
View file @ 1f8c8353
......@@ -53,9 +53,9 @@
Maemo 5/Fremantle devices.
\o \l{Deploying Applications to QNX Devices}
When you deploy the application on a QNX device, depending
on your target device, \QC either generates a BAR package in the
build directory and deploys it to the connected device, or copies
When you deploy the application on a BlackBerry, \QC generates a
BAR package in the build directory and deploys it to the connected
device. When you deploy it on a QNX Neutrino device, \QC copies
the application files to the connected device. You can test and
debug the application on the device.
\endlist
......@@ -67,8 +67,7 @@
When you are ready to publish the application on a publishing
channel, you must make sure that the installation file meets the
requirements for publishing and installing applications to the
targeted devices.
requirements for publishing on the channel.
\endlist
*/
doc/src/overview/creator-glossary.qdoc
View file @ 1f8c8353
......@@ -103,7 +103,8 @@
\o Project
\target glossary-project
\o Groups together a set of source files, forms, and resource files
that you can build, deploy, and run for different \e targets, as
that you can build, deploy, and run for different desktop and
mobile device platforms, as
specified by a \e {build configuration}, \e {deploy
configuration}, and \e {run configuration}.
......
doc/src/overview/creator-mobile-targets.qdoc
View file @ 1f8c8353
......@@ -29,14 +29,13 @@
\page creator-connecting-mobile.html
\nextpage creator-developing-android.html
\title Connecting Mobile Targets
\title Connecting Mobile Devices
You can connect mobile devices to the development PC to build, run, debug,
and analyze applications on them from \QC. When you install
\l{glossary-buildandrun-kit}{kits} for building and running on mobile targets
as part of the \QSDK, the build and run settings for the target devices are
set up automatically in \QC. However, \QSDK does not contain a tool chain
for building applications for embedded Linux devices.
and analyze applications on them from \QC. When you install an SDK for a
target platform, such as Android or QNX, the build and run settings for the
development targets delivered with the SDK might be set up automatically in
\QC.
You can connect the device to the development PC using a USB connection.
Additionally, you can connect Linux-based devices by using a WLAN
......@@ -57,8 +56,7 @@
If you have a tool chain for building applications for embedded
Linux devices (with no MADDE support) installed on the development
PC, you can add it to \QC. Create device configurations and select
them in the \QC run settings.
PC, you can add it and the device to \QC.
\o \l{Connecting Maemo Devices}
......
doc/src/overview/creator-overview.qdoc
View file @ 1f8c8353
......@@ -90,7 +90,7 @@
applications for desktop environment and mobile devices.
\l{glossary-buildandrun-kit}{Kits}, build,
run, and deployment settings allow you to quickly switch between
different setups and targets.
different setups and target platforms.
For more information, see \l{Building and Running}.
\o \bold {\l{Debugging and Analyzing}}
......
doc/src/projects/creator-projects-build-run-tutorial.qdoc
View file @ 1f8c8353
......@@ -65,7 +65,7 @@
\o To test the application in \QS, click the \gui {Kit
Selector} and select \gui {\QS}.
\image qtcreator-gs-build-example-select-qs.png "Selecting Qt Simulator as target device type"
\image qtcreator-gs-build-example-select-qs.png "Selecting Qt Simulator to run on"
\o Click
\inlineimage qtcreator-run.png
......@@ -82,7 +82,7 @@
\o Change the settings in the \gui Model view. For example, rotate the
device by clicking the \gui {Orientation} buttons or choose from the
various mobile device configurations in the \gui {Device} field. You
various mobile devices in the \gui {Device} field. You
can also simulate various mobile functions and create your own
scripts.
......
doc/src/projects/creator-projects-building-running.qdoc
View file @ 1f8c8353
......@@ -34,23 +34,24 @@
\image creator_buildingrunning.png
\QC provides support for building, running, and deploying Qt applications
for different targets, or using different compilers, debuggers or Qt versions.
for different target platforms, or using different compilers, debuggers, or
Qt versions.
\l{glossary-buildandrun-kit}{Kits} define the tools,
device type and other settings to use when building and running your project.
\list
\o \l{Building for Multiple Targets}
\o \l{Building for Multiple Platforms}
\e {Build configurations} contain everything you need to compile
the sources into binaries. Build configurations use the tools and settings
defined in their corresponding \l{glossary-buildandrun-kit}{kit}.
\o \l{Running on Multiple Targets}
\o \l{Running on Multiple Platforms}
\e {Run configurations} start the application in the location
where it was copied by the \e{deploy configuration}. By default,
when you select the \gui Run function, \QC builds the project,
deploys it to the target defined in the \l{glossary-buildandrun-kit}{kit},
deploys it to the device defined in the \l{glossary-buildandrun-kit}{kit},
and runs it there. However,
if you have not made any changes to the project since you last
built and deployed it, \QC simply runs it again.
......@@ -62,10 +63,10 @@
at. The files can be copied to a location in the file system of
the development PC or a mobile device.
\o \l{Connecting Mobile Targets}
\o \l{Connecting Mobile Devices}
When you install tool chains for device types as part of the \QSDK,
the build and run settings for mobile device types are set up
When you install tool chains for device types as part of an SDK,
the build and run settings for mobile device types might be set up
automatically. However, you might need to install and configure some
additional software on the devices to be able to connect to them
from the development PC.
......@@ -79,7 +80,7 @@
\o \l{Customizing the Build Process}
By default, running an application also builds it and deploys it to
a location from where it can be run on the target device. You can change
a location from where it can be run on the device. You can change
the relationship between the build, run, and deploy configurations.
\o \l{http://doc.qt.nokia.com/qtsimulator/index.html}
......
doc/src/projects/creator-projects-building.qdoc
View file @ 1f8c8353
......@@ -29,9 +29,10 @@
\page creator-building-targets.html
\nextpage creator-running-targets.html
\title Building for Multiple Targets
\title Building for Multiple Platforms
You can build applications for multiple targets, or using different compilers,
You can build applications for multiple target platforms, or using different
compilers,
debuggers or Qt versions. \l{glossary-buildandrun-kit}{Kits} define the tools,
device type and other settings to use.
......
doc/src/projects/creator-projects-creating.qdoc
View file @ 1f8c8353
......@@ -238,7 +238,7 @@
for building and running projects, select \gui{Tools} > \gui{Options} >
\gui{Build & Run} > \gui{General}.
To specify build and run settings for different target platforms ,
To specify build and run settings for different target platforms,
select \gui Projects.
\section1 Adding Files to Projects
......
doc/src/projects/creator-projects-running.qdoc
View file @ 1f8c8353
......@@ -29,7 +29,7 @@
\page creator-running-targets.html
\nextpage creator-deployment.html
\title Running on Multiple Targets
\title Running on Multiple Platforms
By default, running an application also builds it and deploys it to a
location from where it can be run on the desktop, in \QS, or
......
doc/src/projects/creator-projects-settings-overview.qdoc
View file @ 1f8c8353
......@@ -31,10 +31,9 @@
\title Configuring Projects
\omit
When you install the \QSDK, the build and run settings for the development
targets delivered with the \QSDK are set up automatically.
\endomit
When you install an SDK for a target platform, such as Android or QNX, the
build and run settings for the development
targets delivered with the SDK might be set up automatically in \QC.
To view and modify the settings for currently open projects, switch to the
\gui Projects mode by pressing \key Ctrl+5.
......
doc/src/projects/creator-projects-targets.qdoc
View file @ 1f8c8353
......@@ -68,10 +68,7 @@
\o In the \gui Name column, double-click the kit name to change it.
\o In the \gui{Device type} field, select the type of the device to
target.
\o In the \gui{Device type} field, select the type of the device.
Double-click the icon next to the field to select the image that is
displayed in the kit selector for this kit. You can use any
......@@ -80,7 +77,7 @@
logo as an icon allows you to easily see, which compiler is used to
build the project for the selected kit.
\o In the \gui Device field, select the device configuration to target.
\o In the \gui Device field, select a device.
\o In the \gui Sysroot field, specify the directory where the device
image is located. If you are not cross-compiling, leave this field
......
doc/src/qnx/creator-deployment-qnx.qdoc
View file @ 1f8c8353
......@@ -32,13 +32,11 @@
\title Deploying Applications to QNX Devices
When you deploy the application on the \gui{QNX} target, depending on your
target device, \QC either generates a BAR package and installs it on the
connected device, or copies the application files to the device.
You can deploy applications to BlackBerry and QNX Neutrino devices.
\section1 Deploying to BlackBerry Devices
For \gui{BlackBerry} targets, \QC generates a BAR package in the build
For BlackBerry devices, \QC generates a BAR package in the build
directory and installs it on the connected device. The contents of the BAR
package are specified in the \gui{Application Descriptor File}.
......@@ -64,7 +62,7 @@
\section1 Deploying to QNX Neutrino Devices
Deploying applications to a \gui{QNX Neutrino} device is very similar to
Deploying applications to a QNX Neutrino device is very similar to
\l{Deploying Applications to Linux-Based Devices}.
\image qtcreator-qnx-deployment.png "Deploy to device"
......
doc/src/qnx/creator-developing-qnx.qdoc
View file @ 1f8c8353
......@@ -80,9 +80,8 @@
\section1 Adding a BlackBerry Device in \QC
Adding a BlackBerry device is done using a wizard in the \gui{Device
Configurations} options. To launch it, go to \gui{Tools > Options >
Linux Devices > Device Configurations > Add... > BlackBerry Device > Start
Wizard}.
Configurations} options. To launch it, go to \gui Tools > \gui Options >
\gui Devices > \gui Add > \gui {BlackBerry Device} > \gui {Start Wizard}.
\image qtcreator-qnx-device-configurations-wizard-1.png "Connection details"
......@@ -109,10 +108,10 @@
Click \gui{Next} and then \gui{Finish} to complete setting up the device
connection.
Once the device is added, you can edit the settings directly in the
\gui{Device Configurations} options page.
Once the device is added, you can edit the settings directly in \gui Tools >
\gui Options > \gui Devices.
\image qtcreator-qnx-device-configurations.png "Device Configurations"
\image qtcreator-qnx-device-configurations.png "Devices"
\section1 Adding a QNX Neutrino Device in \QC
......
doc/src/qtcreator.qdoc
View file @ 1f8c8353
......@@ -86,10 +86,10 @@
\o \list
\o \bold {\l{Building and Running}}
\list
\o \l{Building for Multiple Targets}
\o \l{Running on Multiple Targets}
\o \l{Building for Multiple Platforms}
\o \l{Running on Multiple Platforms}
\o \l{Deploying to Mobile Devices}
\o \l{Connecting Mobile Targets}
\o \l{Connecting Mobile Devices}
\endlist
\endlist
\o \list
......@@ -231,15 +231,15 @@
\endlist
\o \l{Building and Running}
\list
\o \l{Building for Multiple Targets}
\o \l{Running on Multiple Targets}
\o \l{Building for Multiple Platforms}
\o \l{Running on Multiple Platforms}
\o \l{Deploying to Mobile Devices}
\list
\o \l{Deploying Applications to Android Devices}
\o \l{Deploying Applications to Linux-Based Devices}
\o \l{Deploying Applications to QNX Devices}
\endlist
\o \l{Connecting Mobile Targets}
\o \l{Connecting Mobile Devices}
\list
\o \l{Connecting Android Devices}
\o \l{Connecting Embedded Linux Devices}
......
doc/src/qtquick/qtquick-creating.qdoc
View file @ 1f8c8353
......@@ -184,7 +184,7 @@
\image qmldesigner-new-project-harmattan-options.png "Harmattan Specific dialog"
\o In the \gui {Application icon} field, select the application
icon to use on Maemo or Harmattan targets, or use the default icon.
icon to use on Maemo or Harmattan devices, or use the default icon.
The \gui {Project Management} dialog opens.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment