GitLab

Change-Id: I447acf28849bffb52c1e6b6eafdde221ec0b179e
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Adding QTC_FIND_ERRORS_INDEXING=1 to the run environment will Creator
force to do some "extended indexing" in order to find bugs:

   1) The project files are parsed as if they would be opened in an
      editor. That is, parsing happens as precisely as possible, based on
      the ProjectPart information.

   2) Symbols are looked up by invoking CheckSymbols, the backend of the
      semantic highlighter.

   3) A "Task List File" (*.tasks) will be written with all diagnostic
      messages.

This special indexing mode is meant for testing purposes. E.g. it can be
run nightly on some bigger projects to find regressions.

Note that Qt Creator will quit exactly after the first time some source
files are indexed. E.g. that will happen if you open a file manually or
if you open a new unconfigured project. Therefore it's required to
configure projects as needed before invoking in this indexing mode.

Change-Id: If25b83e67d24df9e28e107cb062f21cbf3b4c643
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

In case the list of source files to be parsed is empty, the
CppSourceProcessor is never deleted.

This was never a real problem because of the guard in
CppModelManager::updateSourceFiles().

Change-Id: Icfd6962d11f2b2bf2ac28825f2fa0af0838a09c8
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Change-Id: Ia76a59f0c2739bec5e145edce3ca8711f54b5fa4
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Instead of having two lists of paths, now only one list is used where
both include paths and framework paths can be mixed. This reflects the
way the compiler is invoked, and retains the (correct) search order.

Task-number: QTCREATORBUG-11599
Change-Id: I373953e3e305df5b7a0d10920e12d146584adf9f
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

With every single change in a document the corresponding IndexItem
elements were extracted and put into an vector. The locator filters
then used these lists to iterate over and filter them.

This change removes that extraction, and the filtering now directly
iterates over the IndexItem elements with a callback.

The exception is the current document filter, because it also queries
for all declarations. Adding this to the model would result in a higher
memory usage, while that information is only used by this filter.

Change-Id: Ibe445cc11e9f68b5d807348fd46c7cac4aff4c85
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Change-Id: Iac6c9fe1ada27ac0d96417e490cc5723e6969541
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

And move it into its own header and source files.

Change-Id: I37401badd819e028e1d767425759dc0ff27afe31
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

...since it does quite a bit more than only preprocessing, as the name
suggests. We use that class to process source files in general. The
output is not a preprocessed source, but a set of CPlusPlus::Documents
with symbols.

Change-Id: I787d0f22f9f042ddf0c99e8c2f0bdb9aa7001735
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Change-Id: I849e0819a54dc8d6c49675c78d6668daf5c40af4
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>
Reviewed-by: David Schulz <david.schulz@digia.com>

Change-Id: I36162ea589ad01cf2ba79fc931732422fc1e6983
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

This string table uniques strings, so that multiple identical strings
share their contents. It is used by the locator and the symbol searcher,
and will later be used by the class view.

Change-Id: Ib8b50f69bbf994d0d7a39b66dc8caf1a3d9bfb42
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Change-Id: I70450a2aa675d69f820de48dd75909f36051efe0
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>

Change-Id: I6405c4dfa07eba1ea09ba23fe20667769eaca748
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Format: QTC_*=(1|0).

Now it's easier to change them in the Run Configuration of Qt Creator.

Change-Id: Ifc45cecb89b33a31942b4c3e2d03851a1d72d0bf
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

..while initial parsing.

Change-Id: I202da3f4f9e445a28e9726352fc005488efe2893
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Change-Id: I7053310272235d854c9f409670ff52a10a7add8b
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

The leaves in the treeview contained qualified ids.

Change-Id: I290eaf9b1e666b6879d6d4b1f2483cfe7fb85362
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Change-Id: I72993fda50ad70ad2d7c2f449923ac6e34b9e737
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

Change-Id: I4af8793ca69a3af9e99baeb7c31dad3864266f91
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

This will make it easier to use a single SearchSymbols instance and a
single run serving all locator filters.

Change-Id: Idb6a3693ad356227d46d0b28fb4c3a5db62b4ac4
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Change-Id: Ic7e634e4249fb64edbc2daceb65ec8e9b5f0f8b9
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Aurindam Jana <aurindam.jana@digia.com>

Change-Id: I1309db70e98d678e150388c76ce665e988fdf081
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

Task-number: QTCREATORBUG-9597

Change-Id: I726a818c7d4af35dcb4863f74b08cd639a189bdd
Reviewed-by: Daniel Teske <daniel.teske@digia.com>

Change-Id: I399d667a1fccb376fadbd6ab8fbba243e86d8f4b
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Simplifies code and makes it independent from mimetype names.

Change-Id: Ib56a07654df4986b1916c517e3862e6c3a3dd720
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

Ran script to remove inludes on a trial-and-error basis and
manually corrected it.

Change-Id: Ic8464ea084ca1ab401e9f4a7d0183b92b4038902
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

There were quite a few classes using CPlusPlus namespace in the
CppTools plugin. Rename them and do some other small namespace
related coding style fixups.

Change-Id: I093fc1f3fc394fd9923e3f18d5f66522e288f21d
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>

... and adjust INCLUDEPATH accordingly.

while i'm at messing with include statements, also re-order the include
blocks according to policy and sort them within bigger blocks.

Change-Id: I7762abfd7c4ecf59432b99db2f424e4fa25733a5
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

Change-Id: I69e892de34e06a0c95b3218abd8a0bb72966d875
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Change-Id: I5636039c79be40505c707f775b228bc51f35c243
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Change-Id: I9b199df863b404e4cb2ce3c76c920b9010c09260
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Change-Id: Ic043a097947a80e2fb5cb381c585375c4e5f5eef
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

Change-Id: Ibe4cc69eafd14dab7707862b1068ce1e21b1d8e0
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>

The indexing support for the built-in code model is moved to its own
file. Symbol searching will now call for a searcher through that support
interface, which will create a fully configured and ready-to-go searcher
that can be started in the/a future.

Change-Id: Idc3ee1c7c789a69fa05ee1d42415313dcea94cf8
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>