GitLab

This removes the need of bookkeeping on the engine side. It's
basically a kind of mark-and-sweep: On update begin mark items
that are expected to change as outdated, while data arrives, undo
that marking, and update end remove all remaining marked items.

Change-Id: I739b84869033d511d5c9a80605c079e87ef4f6a7
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

Follows suit after 3d78ec69.

Change-Id: I1756e0e50dcf414db9ea3f3b2092f8eeb647ae80
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>

As handling debug output is synchronous.

Change-Id: Ia3b84065698e2fe7903cd490b72686ceec06bdde
Task-number: QTCREATORBUG-14676
Reviewed-by: Alessandro Portale <alessandro.portale@theqtcompany.com>

Task-number: QTCREATORBUG-14652
Change-Id: I67e450bad1873e0fd68f6ae11ea29f227dd5682f
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>

Change-Id: Ia5cabc1d9df46129c22f9a84901632de5da3824e
Reviewed-by: hjk <hjk@theqtcompany.com>
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>

Task-number: QTCREATORBUG-12834
Change-Id: I3a38f9bd7e98b9ef982ea51c2ffccbdaf3595a9c
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>

That pointer is used later in the method, so make sure we do not
mess something up.

Change-Id: I9162803bd86b0cc3c1d28a7265245f6d43efeb6a
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>

Actually it is quite slow anyway to cast the variant to the value.

Change-Id: Ied18208455adf9d7d5eb500e139170ced597dc1c
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

Change-Id: I6509582616755b0821a00d264e5be657803a6962
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

Hanging connection attempts will be aborted in response to the
"retry" message box now.

Change-Id: I63775eed9d7677a62293ba5c96a43e839ba285b4
Task-number: QTCREATORBUG-14685
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>

Change-Id: I77d1a1b27959d5c547daf3943a772c68caa80ff6
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

Change-Id: Ic9ea62de2d12736ae672cef6ea63376637dc30e6
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>

Change-Id: Ib8089f4afdb72840d97e5286d8be631387e4d2c5
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

First step for refactor them.

Change-Id: If9de084e39ddf31317035ccbbc1fd57d7797d193
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

Change-Id: I98996eee080ca25b812b53d02a89f45fdcdf3c52
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>

After expanding branches, notify the user in case there are none.

Change-Id: Id8a8d18933394208f8823c55124189ab37be4153
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>

This breaks the nice property of changes to one Qt version only
effecting that version:-/

Task-number: QTCREATORBUG-14677
Change-Id: Ibec062663b6cc5cabedcd910a8c642b870527d72
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>

Change-Id: I61911287c88c9e13718b08af2542e9bcc6c4aa08
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>

When setting up a symbol server path, the debugger startup could
increase to an unacceptable amount of time. So this is an attempt to
hide this feature for the standard user, but still keep it accessible
for everyone else.

Change-Id: I719f3091fe483f446488c75001e29278e1b405ea
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>

Change-Id: I6843e40357c7424ae15848f358f00e617d73c985
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>

...because Qt Creator blocks external links.

Also remove the word "Please", to follow the
UI text guidelines.

Change-Id: I060035367ede54c3915f5396ffb42c7be73b729d
Reviewed-by: Orgad Shaneh <orgads@gmail.com>

Change-Id: I1fa597d1cd582f8eb4a37c3bbb963441696e9f4a
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

Change-Id: I86f0b6aaf6da70634b1d8e191eb069f4e456f5fa
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

To make it clear that it is for testing only.

Change-Id: If257b0049e87c834b24073991f173bfc1b3e93e7
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@theqtcompany.com>

This reverts commit 540f5677.
For some reason the change broke reparsing of .pro files after
they are edited.

Change-Id: I61560d3d7a3ccd8aac72c80b37421ed924f2323c
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>

Change-Id: Ie356b96a521a9f9a95a6d1a09e5310f2f8ba6349
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>

Change-Id: I20b8c7b14cd9e74c5d26578000ed660847968021
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>

NSMetadataQueryUpdateAddedItemsKey is only available on 10.9 or later
and is available through Foundation only in 10.10.
Use the CoreServices constant instead, which is available since 10.4.

Task-number: QTCREATORBUG-14525
Change-Id: Icddedb77c77efca82ca00090c8a5d53db3284c96
Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>

Handle qmake warnings that start with WARNING: or ERROR: but do not
contain any obvious filename.

Task-number: QTCREATORBUG-14335
Change-Id: I5b4cedbb7408c74092fb81412cc50b37e4698b7e
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>

Plugin incorrectly process additional OpenOCD arguments in case of
Network or Pipe startup modes: all arguments in this line interprets as
one big argument. So, it must be split before using
Utils::QtcProcess::splitArgs(). Otherwise debugging fails to start if
additional arguments consists from two or more parameters.

Change-Id: I5645c0d5a43a58399135c1225f01fe160873a68d
Reviewed-by: Tim Sander <tim@krieglstein.org>
Reviewed-by: hjk <hjk@theqtcompany.com>

Don't add all actions to a tool button with a misleading
name.

Change-Id: Iafb62b5ebd27c3983528c1f3afa3ea6524521df7
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>

The actual problem here was a wrong use of the recursive
findItem() (instead of a check of the direct children).
That went unnoticed, as the recursive search happens
to find the right child *unless* the iname was empty,
which usually should not happen, but did here, since the
LLDB output was not as well-formed as expected.

Task-number: QTCREATORBUG-14660
Change-Id: I368d92c058354d829aab52c6cc37c7f350223dbe
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>

This quietens warnings from libPNG during startup and shrinks the
image sizes.

Change-Id: Ieb4cb5e8ba30b99653896e283c2fb2cc267257f2
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>

Separate provider data and tree nodes in provider settings widget.

Change-Id: Ia11e4b342dab4f4cbca86f58b7517a2bd26687ec
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Alexander Drozdov <adrozdoff@gmail.com>

Change-Id: Ic144da9b9511dfd13960c2263be89dd06683e228
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>

Change-Id: Ie28683085c4c545ac18310de2867468bd20e8975
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>

s/trCategory/trDisplayCategory/ to match set field in the wizard.json file.

Change-Id: I3c78cc1e49978e028fb17256f82eb852a5dc50cb
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>

Change-Id: Iedbb44e476ce4791c876d560cdba74d3e71597a6
Reviewed-by: Orgad Shaneh <orgads@gmail.com>

Change-Id: I936c289e806993165bc9ee3745d754e2a368835c
Reviewed-by: Thorben Kroeger <thorbenkroeger@gmail.com>
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>

...coming from TemporaryCopiedDir.

The warning was:

	QTemporaryDir: Unable to remove <some path> most likely due to the presence
	               of read-only files.

It occurred for plugin tests (e.g ClangCodeModel) that used a Qt resource path
as source for TemporaryCopiedDir. Copying a qrc file makes it read-only, see
also QTBUG-17163. Therefore, explicitly add the write permission.

Change-Id: Idc04acd4844c5bc20e9b3de1efc78da3b06ac97c
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Marco Bubke <marco.bubke@theqtcompany.com>