dcgu.c 6.19 KB
Newer Older
Alexander Yurtsev's avatar
Alexander Yurtsev committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258
/*
 * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
 *
 * Original Author Guenter Gebhardt
 * Copyright (C) 2006 Micronas GmbH
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <asm/errno.h>

#include "vct.h"

int dcgu_set_clk_switch(enum dcgu_hw_module module, enum dcgu_switch setup)
{
	u32 enable;
	union dcgu_clk_en1 en1;
	union dcgu_clk_en2 en2;

	switch (setup) {
	case DCGU_SWITCH_ON:
		enable = 1;
		break;
	case DCGU_SWITCH_OFF:
		enable = 0;
		break;
	default:
		printf("%s:%i:Invalid clock switch: %i\n", __FILE__, __LINE__,
		       setup);
		return -EINVAL;
	}

	if (module == DCGU_HW_MODULE_CPU)
		en2.reg = reg_read(DCGU_CLK_EN2(DCGU_BASE));
	else
		en1.reg = reg_read(DCGU_CLK_EN1(DCGU_BASE));

	switch (module) {
	case DCGU_HW_MODULE_MSMC:
		en1.bits.en_clkmsmc = enable;
		break;
	case DCGU_HW_MODULE_SSI_S:
		en1.bits.en_clkssi_s = enable;
		break;
	case DCGU_HW_MODULE_SSI_M:
		en1.bits.en_clkssi_m = enable;
		break;
	case DCGU_HW_MODULE_SMC:
		en1.bits.en_clksmc = enable;
		break;
	case DCGU_HW_MODULE_EBI:
		en1.bits.en_clkebi = enable;
		break;
	case DCGU_HW_MODULE_USB_PLL:
		en1.bits.en_usbpll = enable;
		break;
	case DCGU_HW_MODULE_USB_60:
		en1.bits.en_clkusb60 = enable;
		break;
	case DCGU_HW_MODULE_USB_24:
		en1.bits.en_clkusb24 = enable;
		break;
	case DCGU_HW_MODULE_UART_2:
		en1.bits.en_clkuart2 = enable;
		break;
	case DCGU_HW_MODULE_UART_1:
		en1.bits.en_clkuart1 = enable;
		break;
	case DCGU_HW_MODULE_PERI:
		en1.bits.en_clkperi20 = enable;
		break;
	case DCGU_HW_MODULE_CPU:
		en2.bits.en_clkcpu = enable;
		break;
	case DCGU_HW_MODULE_I2S:
		en1.bits.en_clk_i2s_dly = enable;
		break;
	case DCGU_HW_MODULE_ABP_SCC:
		en1.bits.en_clk_scc_abp = enable;
		break;
	case DCGU_HW_MODULE_SPDIF:
		en1.bits.en_clk_dtv_spdo = enable;
		break;
	case DCGU_HW_MODULE_AD:
		en1.bits.en_clkad = enable;
		break;
	case DCGU_HW_MODULE_MVD:
		en1.bits.en_clkmvd = enable;
		break;
	case DCGU_HW_MODULE_TSD:
		en1.bits.en_clktsd = enable;
		break;
	case DCGU_HW_MODULE_GA:
		en1.bits.en_clkga = enable;
		break;
	case DCGU_HW_MODULE_DVP:
		en1.bits.en_clkdvp = enable;
		break;
	case DCGU_HW_MODULE_MR2:
		en1.bits.en_clkmr2 = enable;
		break;
	case DCGU_HW_MODULE_MR1:
		en1.bits.en_clkmr1 = enable;
		break;
	default:
		printf("%s:%i:Invalid hardware module: %i\n", __FILE__,
		       __LINE__, module);
		return -EINVAL;
	}

	/*
	 * The reg_read() following the reg_write() below forces the write to
	 * be really done on the bus.
	 * Otherwise the clock may not be switched on when this API function
	 * returns, which may cause an bus error if a registers of the hardware
	 * module connected to the clock is accessed.
	 */
	if (module == DCGU_HW_MODULE_CPU) {
		reg_write(DCGU_CLK_EN2(DCGU_BASE), en2.reg);
		en2.reg = reg_read(DCGU_CLK_EN2(DCGU_BASE));
	} else {
		reg_write(DCGU_CLK_EN1(DCGU_BASE), en1.reg);
		en1.reg = reg_read(DCGU_CLK_EN1(DCGU_BASE));
	}

	return 0;
}

int dcgu_set_reset_switch(enum dcgu_hw_module module, enum dcgu_switch setup)
{
	union dcgu_reset_unit1 val;
	u32 enable;

	switch (setup) {
	case DCGU_SWITCH_ON:
		enable = 1;
		break;
	case DCGU_SWITCH_OFF:
		enable = 0;
		break;
	default:
		printf("%s:%i:Invalid reset switch: %i\n", __FILE__, __LINE__,
		       setup);
		return -EINVAL;
	}

	val.reg = reg_read(DCGU_RESET_UNIT1(DCGU_BASE));
	switch (module) {
	case DCGU_HW_MODULE_MSMC:
		val.bits.swreset_clkmsmc = enable;
		break;
	case DCGU_HW_MODULE_SSI_S:
		val.bits.swreset_clkssi_s = enable;
		break;
	case DCGU_HW_MODULE_SSI_M:
		val.bits.swreset_clkssi_m = enable;
		break;
	case DCGU_HW_MODULE_SMC:
		val.bits.swreset_clksmc = enable;
		break;
	case DCGU_HW_MODULE_EBI:
		val.bits.swreset_clkebi = enable;
		break;
	case DCGU_HW_MODULE_USB_60:
		val.bits.swreset_clkusb60 = enable;
		break;
	case DCGU_HW_MODULE_USB_24:
		val.bits.swreset_clkusb24 = enable;
		break;
	case DCGU_HW_MODULE_UART_2:
		val.bits.swreset_clkuart2 = enable;
		break;
	case DCGU_HW_MODULE_UART_1:
		val.bits.swreset_clkuart1 = enable;
		break;
	case DCGU_HW_MODULE_PWM:
		val.bits.swreset_pwm = enable;
		break;
	case DCGU_HW_MODULE_GPT:
		val.bits.swreset_gpt = enable;
		break;
	case DCGU_HW_MODULE_I2C2:
		val.bits.swreset_i2c2 = enable;
		break;
	case DCGU_HW_MODULE_I2C1:
		val.bits.swreset_i2c1 = enable;
		break;
	case DCGU_HW_MODULE_GPIO2:
		val.bits.swreset_gpio2 = enable;
		break;
	case DCGU_HW_MODULE_GPIO1:
		val.bits.swreset_gpio1 = enable;
		break;
	case DCGU_HW_MODULE_CPU:
		val.bits.swreset_clkcpu = enable;
		break;
	case DCGU_HW_MODULE_I2S:
		val.bits.swreset_clk_i2s_dly = enable;
		break;
	case DCGU_HW_MODULE_ABP_SCC:
		val.bits.swreset_clk_scc_abp = enable;
		break;
	case DCGU_HW_MODULE_SPDIF:
		val.bits.swreset_clk_dtv_spdo = enable;
		break;
	case DCGU_HW_MODULE_AD:
		val.bits.swreset_clkad = enable;
		break;
	case DCGU_HW_MODULE_MVD:
		val.bits.swreset_clkmvd = enable;
		break;
	case DCGU_HW_MODULE_TSD:
		val.bits.swreset_clktsd = enable;
		break;
	case DCGU_HW_MODULE_TSIO:
		val.bits.swreset_clktsio = enable;
		break;
	case DCGU_HW_MODULE_GA:
		val.bits.swreset_clkga = enable;
		break;
	case DCGU_HW_MODULE_MPC:
		val.bits.swreset_clkmpc = enable;
		break;
	case DCGU_HW_MODULE_CVE:
		val.bits.swreset_clkcve = enable;
		break;
	case DCGU_HW_MODULE_DVP:
		val.bits.swreset_clkdvp = enable;
		break;
	case DCGU_HW_MODULE_MR2:
		val.bits.swreset_clkmr2 = enable;
		break;
	case DCGU_HW_MODULE_MR1:
		val.bits.swreset_clkmr1 = enable;
		break;
	default:
		printf("%s:%i:Invalid hardware module: %i\n", __FILE__,
		       __LINE__, module);
		return -EINVAL;
	}
	reg_write(DCGU_RESET_UNIT1(DCGU_BASE), val.reg);

	return 0;
}