-
Alexander Potashev authored
* Add Makefile target `lpc1850-eval_config`. * Set the system prompt to `LPC1850-EVAL> `. * Change CONFIG_MEM_NVM_LEN from 128 KBytes to 96 KBytes to match the size of the largest continuous region of internal SRAM on LPC1850. * Adjust clock configuration for the 180MHz maximum core clock rate on LPC1850: set the PLL1 multiplier value to 15. * Adjust SDRAM timings for the 180MHz maximum core clock rate on LPC1850. * Adjust NOR flash timings for the 180MHz maximum core clock rate on LPC1850. * Change default MAC address and IP address of the board defined in the U-Boot environment.
40aa1110