1. 15 Jun, 2015 1 commit
  2. 06 Mar, 2015 1 commit
  3. 02 Mar, 2015 2 commits
  4. 27 Feb, 2015 1 commit
  5. 26 Feb, 2015 1 commit
  6. 24 Feb, 2015 1 commit
  7. 18 Feb, 2015 2 commits
  8. 17 Feb, 2015 1 commit
  9. 11 Feb, 2015 1 commit
  10. 09 Feb, 2015 1 commit
    • Yuri Tikhonov's avatar
      RT106081: U-Boot STM32F7: fix-up MPU configuration · 7356326f
      Yuri Tikhonov authored
      
      
      In case of disabled DCACHE we previously had the only one 4GB MPU
      region with 'Strongly ordered' mem type. This led to problems with
      strex/ldrex instruction targeted such mem (and thus we couldn't use
      these instructions).
      
      Now we always create 2 MPU region, even if DCACHE is off. The 2nd
      MPU region is mapped to external SDRAM, and has 'Normal' mem type.
      
      This patch also changes 'write-through' caching policy to 'write-
      back with write & read allocate'.
      Signed-off-by: default avatarYuri Tikhonov <yur@emcraft.com>
      7356326f
  11. 29 Jan, 2015 3 commits
  12. 27 Jan, 2015 1 commit
  13. 24 Jan, 2015 1 commit
  14. 21 Jan, 2015 1 commit
  15. 18 Sep, 2014 1 commit
  16. 19 Dec, 2013 1 commit
  17. 11 Nov, 2013 1 commit
    • Pavel Boldin's avatar
      RT #90499: STM32F4X9-SOM NOR/SDRAM errata 2.8.7 fix · 427d84f4
      Pavel Boldin authored
      Copy image from NOR to SDRAM through On-Chip RAM buffer
      setting SDRAM to Self-Refresh on each copy.
      
      Implement flash_read16, flash_write16 and flash_write_buffer
      to disable/enable SDRAM on flash access.
      
      Start and immediately put SDRAM in self-refresh on start-up for flash
      to work correctly.
      427d84f4
  18. 31 Oct, 2013 1 commit
  19. 23 May, 2013 1 commit
  20. 29 Apr, 2013 1 commit
  21. 09 Apr, 2012 1 commit
    • Alexander Potashev's avatar
      RT76276. Add support for STMicroelectronics STM3240G-EVAL board · f271a6db
      Alexander Potashev authored
      * Clone the board-specific files from those used for the STM3220G-EVAL board.
      * Change STM3220G-EVAL to STM3240G-EVAL where appropriate.
      * cpu/arm_cortexm3/stm32/clock.c: Add support for clock rates up to 168 MHz.
      * Ethernet driver: Implement us/ms delays not tied to CPU clock rate.
      * Ethernet driver: Add `stm_phy_wait_busy()` to reduce code duplication.
      * Raise system clock rate from 120 MHz to 168 MHz.
      * Update PSRAM timings.
      * Disable the PSRAM Synchronous Burst Mode.
      f271a6db
  22. 20 Jan, 2012 1 commit
  23. 17 Nov, 2011 1 commit
  24. 14 Nov, 2011 2 commits
  25. 10 Nov, 2011 1 commit
  26. 20 Oct, 2011 1 commit
  27. 18 Oct, 2011 2 commits
  28. 14 Oct, 2011 1 commit
  29. 10 Oct, 2011 1 commit
  30. 07 Oct, 2011 3 commits