GitLab

Especially for mixed debugging getting the ID explicitly
gives hints which part of the combined engine fails.

Change-Id: Iab4b54d6e9fb8d4afd3df0855861511bc06454c1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

... and simplify "user" code.

Change-Id: I2dfa402f25ab83f1ab80adc0ac508e8383c69641
Reviewed-by: David Schulz <david.schulz@digia.com>

Change-Id: Ib5423fdd064e4546f848c0b640b0ed0514c26d3a
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

This affects mainly Apple's version of GDB. Mac users are advised to
use LLDB, or some recent build of FSF GDB.

Change-Id: I6a7fbb591e79f737e12d08b0e881e9e4d1d9660c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

That's dead code now that we go with the Python interface.

Change-Id: Ie10393d6adf5d25540c4082aeccf683e88bcdc89
Reviewed-by: hjk <hjk121@nokiamail.com>

They are a hassle for translators and reviewers alike.

Change-Id: I363138212b692cf75fe1605df8af3721315d37e1
Reviewed-by: hjk <hjk121@nokiamail.com>

Denoise usages

get{Short|Long}PathName are now static. They're not used anywhere except
in normalizePathName.

Change-Id: Ief277b6d828faadd98ec7faa39dd682bfaa8805f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

They are a hassle for translators and reviewers alike.

Change-Id: I07c1b61e8b6719e54fdc1f69cf63f573119a6776
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

Change-Id: I1f4283a5727db976d999d4cf4c7e444de8592566
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

Was used by the semi-automated tests which have been merged into
the autotests now.

Change-Id: I899ac95b7134b8c5a838c29d4c16904e85118abf
Reviewed-by: hjk <hjk121@nokiamail.com>

Change-Id: I49869c393b922da75572959973b917894f93f4ec
Reviewed-by: David Schulz <david.schulz@digia.com>

QMessageBox apparently only saves the state in the actual
QMessageBox instance ... anyhow, it's the only place in
QtCreator where we use QMessageBox, which makes it look
somewhat alien. Instead, use CheckableMessageBox and
extend it for an information dialog.

Task-number: QTCREATORBUG-9876

Change-Id: I8014e972943dd4a336952325ebb9f6cbc5dd0902
Reviewed-by: hjk <hjk121@nokiamail.com>

A lot of our build system files specify unneeded include
paths. These roughly fall into the following categories:
    a) Paths that are already set in more general files
       such as qtcreator.pri.
    b) Paths that serve no purpose at all, possibly
       left over from earlier versions of the project.
    c) Paths that act as workarounds for wrong include
       statements of the form '#include "xyz.h"', where
       xyz.h is not in the same directory as the including
      file.
This patch removes such path specifications and fixes the offending
include statements from case c).
Tested on Linux, Windows and OSX with qmake and qbs.

Change-Id: I039a8449f8a65df0d616b4c08081145c18ae4b15
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>

Use setBuildDirectory() in the different BuildConfigurations instead
of reimplementing that over and over again.

Change-Id: Ic355fdb4624c71667ce470b3e2865c9a8722ef09
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

Change-Id: Ia49c6552a5aae72870687ef9c64f2642fbe24155
Reviewed-by: hjk <hjk121@nokiamail.com>

Make methods static and add a instance() method for Signals/Slots.

Remove ProjectExplorerPlugin::taskHub() method and use the new
ones instead.

Change-Id: Ifae24ff19579fc524cbd61bddc826095c443adfa
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>

Change-Id: Ieb559e884fb08c96d739cf7684389ff740a6233e
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

Doesn't really serve a purpose any more.

Change-Id: I8c3bc11bf7b05a15eafd2a22456a40b270cefadf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

Change-Id: If5a05d12e7597516510d5726ca6d3418b3393251
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

It's never used.

Change-Id: I11cc85b1d9a5944017b8a03738877f91cfe5d11f
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

Change-Id: Ie79249039643041fd68da6766b0e6f3ca6080b86
Reviewed-by: hjk <hjk121@nokiamail.com>

Change-Id: I562780c0894f596863c4c8b9cc9b12e3a3a98f33
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Aurindam Jana <aurindam.jana@digia.com>

Use QTcpServer instead of TcpPortsGatherer.

Change-Id: I85133c5ae192b407009c5b21df332c9d3d94acda
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
Reviewed-by: Aurindam Jana <aurindam.jana@digia.com>

Change-Id: If878e22cc2715d05bb3e65ad908cd4fb5e21b03b
Reviewed-by: Daniel Teske <daniel.teske@digia.com>

Move the method used to create a config widget for a
RunConfigurationAspect from the RunControlFactory into the aspect
itself. This allows for aspects that are not bound to any factory,
which is what I eventually want to use to hold the environment for
run configurations.

Change-Id: Icceb5f44ca9eb63a87b9c7bb6468ff30dab943c2
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

Change-Id: I03cab5d963a6d7c77171efe360a552d8109f6a8b
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

NOTE: Next patch will be "Move DRCA to Debugger plugin" and is
needed to make this functional.

Change-Id: Ie405a0e4fbdc0fb35ff16d34c725e7aee5153a4a
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>

Show desktop device in the Devices options page. Allow
user to configure the port range for the desktop. These
ports can then be used by others such as QML Debugger.

Change-Id: I8c4a96207e54f58d1e9bc18c417cb378dc9f70c2
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>

Change-Id: Ie6b9cb68045db12cff1bbb06a7049529fc39c21f
Reviewed-by: hjk <hjk121@nokiamail.com>

Change-Id: Ia50e61a82101b699390b23b4f1ea9509619314bb
Reviewed-by: hjk <hjk121@nokiamail.com>

This is the approach directly linking to the lldb library.

Change-Id: I5d51ad59d8292b46539a55da8e23918fb7de9a92
Reviewed-by: hjk <hjk121@nokiamail.com>

Task-number: QTCREATORBUG-8189
Change-Id: I1c882f55eed901620ef4944bf1789645b7cff34a
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Change-Id: Ic6a9ff0359625021ebc061d22db6811814534205
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

I ran once too often into them being called applicationrunconfiguration.(h|cpp)!

Change-Id: I280a3280173b80d4d955faddedf11688786eee14
Reviewed-by: Daniel Teske <daniel.teske@digia.com>

#!/usr/bin/env ruby

Dir.glob('**/*.cpp') { |file|
  # skip ast (excluding paste, astpath, and canv'ast'imer)
  next if file =~ /ast[^eip]|keywords\.|qualifiers|preprocessor|names.cpp/i
  s = File.read(file)
  next if s.include?('qlalr')
  orig = s.dup
  s.gsub!(/\n *if [^\n]*{\n[^\n]*\n\s+}(\s+else if [^\n]* {\n[^\n]*\n\s+})*(\s+else {\n[^\n]*\n\s+})?\n/m) { |m|
    res = $&
    if res =~ /^\s*(\/\/|[A-Z_]{3,})/ # C++ comment or macro (Q_UNUSED, SDEBUG), do not touch braces
      res
    else
      res.gsub!('} else', 'else')
      res.gsub!(/\n +} *\n/m, "\n")
      res.gsub(/ *{$/, '')
    end
  }
  s.gsub!(/ *$/, '')
  File.open(file, 'wb').write(s) if s != orig
}

Change-Id: I3b30ee60df0986f66c02132c65fc38a3fbb6bbdc
Reviewed-by: hjk <qthjk@ovi.com>

The variable is actually used.

Change-Id: I4b0510b2bad9d3f3f49609dcac5b314da5769c1e
Reviewed-by: hjk <qthjk@ovi.com>

- Introduce constants for task categories, add "RunTime".
- Log exceptions under "RunTime".
- Clear pane on debugger start.
- Add 'first chance'

Task-number: QTCREATORBUG-8141
Change-Id: Icf68def06c42a0f3bb86dcc2ae74750b5397ca52
Reviewed-by: hjk <qthjk@ovi.com>

Change-Id: Ice592c6de9951ee3b2c4cb52ed0bb3b6770e0825
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

This use case is deprecated in Qt 5. Use QPointer instead.

Change-Id: Id6c32542032656d7cb31cf838d93a680ab9e9327
Reviewed-by: Eike Ziller <eike.ziller@digia.com>

Prevent dialog showing "No executable" when canceling the
prompt for the executable when pressing 'Run' / 'Debug'
on a library project. Introduce new
LocalApplicationRunControl::ensureConfigured() to ensure
the configuration is complete and detect cancel via
empty/non-null strings.

Change-Id: I9bd4a296e7c995d26d6ad265519e7ebd3f98d6fe
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>