meta-intel no longer has specific BSPs for each machine, but they
share a common BSP based on the architecture.

Change-Id: Ibbb7b8b2153103367168ea37d904ce23bc245108
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

linux-firmware fails to create the -lic packages with ERROR: QA Issue:
linux-firmware: Files/directories were installed but not shipped in any package.

Change-Id: I8251647bc58f59457d348b6ef2f216d3bba51e12
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: I21217e366c864a6ef13d9f3b1d330b0b99417ade
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: I42bdde07635389048cdc6df3f80e8213ea634c6b
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: Ibc34780bbd8bb5a039fb7d3f97723bd8cc2dec82
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

gstreamer 0.10 recipes were moved to meta-multimedia
meta-ruby not needed anymore for meta-qt5

Change-Id: I30e9e87e557d2e74498fd5047a2b8d6babc9f55f
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: Ia8ebb3f7eabd28868ac554a62dbd25ca140dc226
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: I92cc3c447e4f8d1da987ca49f996e939c81dc69c
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Used by meta-qt5, but available only in oe/master

Change-Id: I60a8f3436a8089f0b8a1b445867d901f3a8dbf70
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: I9ee8f90a84c6cda487362c95e11a21137ab27089
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: Id06b44212a639c5b0dbf71cdf214f61104a5e7c6
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: I29ed4ca799f064360f22947df87c52ceafb42ada
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

OE has moved to gcc 5.2 which cannot be used to build the old
kernel that imx53 still uses, therefore all support for it was
dropped from meta-fsl-arm.

Change-Id: Ic57310f8ae6d06f62274a7c1874df0d01c95b5e9
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Support was removed from bitbake

Change-Id: I6170bd618c41c2dd9deec858b6eb1f0c8da4ffb5
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: I40be27dd2eecc1faf85073337cdc6803b5c0bec1
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: Ifca5ba3a117e47b6186dca7a7be48c823f43a2a7
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

* origin/fido:
  qt5: 5.6.0 branches were removed, using 5.6 instead

Conflicts:
	recipes-qt/qt5/qtconnectivity_git.bbappend

Change-Id: I040f0e26941aca43eabebda65b177bf533bef0d6

Change-Id: I1220cce68059328512e52b7f5a9af7110dd9578c
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: Ia0fd4493c4b87aa3bc48633ceca81fbc2f46ad7a
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Steps to use this:

Set up vibrante installation, mine looks like this:
$ ls -l ~/VibranteSDK
total 234880
drwxrwxr-x 1 louai louai       298 Mar 20  2014 eclipse
-r-xr-xr-x 1 louai louai 171826846 Jan  4 09:59 NVIDIA_Tegra_Graphics_Debugger_2.1_linux-v4l_l4t-egl.run
-r--r--r-- 1 louai louai  68688729 Jan  4 09:59 NVIDIA_Tegra_System_Profiler_2.5-linux-x64.tar.gz
drwxr-xr-x 1 louai louai       262 Jan  5 14:50 toolchains
drwxrwxr-x 1 louai louai        34 Jan  5 13:55 vibrante-oss-src
drwxr-xr-x 1 louai louai        12 Jan  4 09:47 vibrante-t186ref-cuda
drwxrwxr-x 1 louai louai       264 Feb 10 10:50 vibrante-t186ref-foundation
drwxr-xr-x 1 louai louai       164 Jan  5 14:49 vibrante-t186ref-foundation_src
drwxrwxr-x 1 louai louai       228 Jan  5 13:56 vibrante-t186ref-linux
drwxr-xr-x 1 louai louai       314 Feb 10 10:58 vibrante-t186ref-linux_sr

Set up Yocto build dir:
$ mkdir ~/work
$ cd ~/work
$ ~/tqtc-b2qt/yocto-meta/b2qt-init-build-env init --device tegra-t18x

Add NVIDIA's Yocto things:
$ mkdir ~/work/sources/nvidia-layer
$ cd ~/work/sources/nvidia-layer
$ tar xf ~/VibranteSDK/vibrante-t186ref-linux_src/yocto/nvidia-layer.tgz
$ cd -

Set up build environment:
$ export MACHINE=tegra-t18x
$ . setup-environment.sh

Set the following environment variables:
$ export KERN_DIR=~/VibranteSDK/vibrante-t186ref-linux_src/kernel
$ export PLATFORM_TOPDIR=~/VibranteSDK/vibrante-t186ref-linux
$ export TOOLCHAIN_PATH=~/VibranteSDK/toolchains/tegra-4.9-nv
$ export BB_ENV_EXTRAWHITE="$BB_ENV_EXTRAWHITE TOOLCHAIN_PATH KERN_DIR PLATFORM_TOPDIR"

Add NVLAYER_DIR to local.conf:
$ echo 'NVLAYER_DIR = "${TOPDIR}/../sources/nvidia-layer"' >> conf/local.conf

Build your image:
$ bitbake b2qt-embedded-qt5-image

Flash your board:

$ cd $PLATFORM_TOPDIR
$ mv targetfs targetfs-old
$ cd targetfs && tar xf /path/to/rootfs.tar.bz2
$ cd ../../vibrante-t186ref-foundation/utils/scripts/bootburn
$ ./bootburn.sh -b p2382-t186

Change-Id: I4209cd0c19a007c4457460fd67342fc579c2a735
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

Change-Id: Icf6e9610d26aa4c073b49655d691570ba099f5ff
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

* origin/fido:
  qt5: remove duplicate --sysroot from sdk mkspec
  colibri-imx6: don't pull in old gstreamer
  Specify source revision separately
  Disable ethernet over usb on SMARC-sAMX6i

Change-Id: Ic14fccc65d7d30c8400f8fc09bf127fef187bc86

No need to add --sysroot to QMAKE flags in qdevice.pri,
since qconfig.pri does it already.

Change-Id: I8a90249e466f8385fb121d69721e118a32b80999
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

This patch adds consistent_timestamps.bbclass which is
a hackish way of resembling reproducible build -
byte-for-byte identical binary packages from a given source.
Naturally this is not a complete solution, but it fixes
the issue described below. Real solution for this should
be done by the Yocto project itself.

In OSTree each new update is checked out with all files and
directories having mtime=0, this breaks fontconfig cache
validity check (mtime embedded in the cache should match
the containing directories mtime). Yocto generates this cache
file in poky/meta/lib/oe/rootfs.py::create by calling
self._run_intercepts() after all packages have been installed.
These timestamps are nondeterministic as they depend on current
system time.

By using ROOTFS_POSTINSTALL_COMMAND hook we can ensure that
these embedded time stamps have a known time, which is a basic
property of reproducible build system.

Change-Id: Ib2f130248f2e65db391d2b2f19ab5dac30a2cfb0
Task-number: QTEE-1081
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

gst-fsl-plugin pulls in gstremer 0.10, even when 1.0 was selected.

Change-Id: I60f8e6bef8fd1abe1913f4019b847757718fbded
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

By doing so we ensure bitbake can mirror the source locally. Handy on airplanes.

Change-Id: Iaaf96617a4cc0c445444dbdb8d3e562cc9cd1741
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Otherwise the device isn't auto detected by adb on windows.

Task-number: QTBUG-51877
Change-Id: Ia52d4dd8e6cc10aec82b0ea6d50f3b00f412d7d5
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

I am using it without issues and would like to get rid of the warning.

Change-Id: I940e8770d5101e5101dc0f365f3970b7571c4799
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

We can pull in gypsy through qtconnectivity as a dependency, it
currently hardcodes bluez4 in fido for no reason. Fix that. Should
be pushed upstream.

Change-Id: I7ebef9ec50442357f5d82c7bb36b9e27b6f91fd9
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

OSTree by design does not include /var in system
updates, moving cache to ${libdir} allow fontconfig
cache to be updated via OTA.

Change-Id: I41d4588cf725028315d7043ff874399baff4d159
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>
Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>

* origin/fido: (36 commits)
  qt5: update submodules
  b2qt-demos: update revision
  b2qt-appcontroller: update revision
  qt5: move mingw32 specific parts from meta-qt5
  qt5: Use latest version of meta-qt5
  b2qt-demos: update to new revision
  ostree: Mount boot partition from user space
  ostree: Do not use grub2-mkconfig.
  RPi2: add support for touch display
  Disable ethernet over usb on beaglebone.
  qtwayland: update SRCREV
  Move default sstate-cache dir from build dir
  Use distro specific sstate cache
  qtquickcompiler: add support for BYOS builds
  qtcharts: update revision
  qt5: update submodules
  democompositor: use correct path the SDK sources
  b2qt-demos: update SRCREV
  Add git SHA1 to b2qt addon package versions
  b2qt-utils: update SRCREV
  ...

Conflicts:
	recipes-qt/qt5/qtconnectivity_git.bbappend

Change-Id: I1c090c8f87e43664971e0381b93ccad5e4e48175

Change-Id: I4d2d1efd88769eba45891f9ceb3459ce0e8328e5
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: Ie11cb3e92c5dbb27ca1b4b9e763c43891ade3a36
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: Ifc11b3a873fdd2d712f543bf39d21d609e8cd72c
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: Ia2b7f41e028ac751aebb89ba11dd250c4dcaba80
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@theqtcompany.com>

- disable planets demo from emulator
- Language fixes for the demo descriptions

Change-Id: I02bf8566482d61992decf9fb725ab1da0fdb943d
Reviewed-by: Rainer Keller <rainer.keller@theqtcompany.com>

Fix restart feature

Change-Id: I857c30031cda1c4bc2ab864c54e733219a6982ee
Task-number: QTEE-1085
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

Change-Id: Id380844d530ef599f78591a282474aa66d3dec69
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

Change-Id: Ib7a45a830d744cc07520548e30b6c0793a738f5e
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>

QtWebBrowser now builds application as well as qml plugin, but for
qtlauncher we only need the plugin. Also all the needed files from
tqtc-qtwebrowser are in the plugin, we can remove the directory.

Task-number: QTEE-1083
Change-Id: Ia135490a4d95ef3428fb54b84ce5c77588e344ef
Reviewed-by: Kimmo Ollila <kimmo.ollila@theqtcompany.com>