Nitrogen6X/6_Max/6_Lite all use the nl80211 driver for wpa_supplicant
and none of them have an eth1 device.

Change-Id: I17a316d79a1d787229fd9acb758d993921e85dfb
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Adding Broadcom bcm4330 firmware allows use of the same image on
Nitrogen6_Lite.

Change-Id: I2eebe658ea9f81f42d670a47acd7dcd2c6d0909c
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Include the Device Tree binaries for Nitrogen6_Lite and Nitrogen6_Max
to avoid building a completely separate image for each.

Since the Nitrogen6_Lite device tree isn't built by the stock image
in meta-fsl-arm-extra, append it to the KERNEL_DEVICETREE variable.

Change-Id: I085e0473773c84308cb0d826eb8d2da444036ea5
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Previous kernel config changes are now merged upstream, and the fix
for the imx-vpu is also in, so all configuration changes can be removed.

Add support for Nitrogen6_Lite. The Nitrogen6_Lite board supports
a Broadcom 4331 WiFi/Bluetooth module, and typically has one of its'
GPIO ports configured as an LED_GPIO control (for a dry-contact output).

Change-Id: I840e7703624c652acf0a0262102e6491a3908719
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Kernel is now using dtb, include it in the bootfs.
U-boot update to make sdboot the default.
Include u-boot script for updating the u-boot.

Change-Id: I7e4f01ad3d903fbf807c5bf3904a9f955a59e97a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Change-Id: I7e96ba55da0d8b872d9368d91a8bc66a1d37e53c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Builds & runs ok!

The current implementation is done with the strategy of using the
vendor's defined repo versions for the yocto stack, instead of the
common versions defined by b2qt. The intention is to build upon the
vendor stack as closely as possible, as that is (hopefully) tested and
maintained.

Task-number: QTEE-801
Change-Id: Ib93b54178de870b5f288b2fae982ea2b4bb74e50
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: Iaefed14f1d2bfecb436c2bfa68c94ffe74672128
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

libgal-dev only provides libGAL.so in the toolchain. That is not enough
when compiling a hardware compositor (e.g. the Weston hw compositor patch)
because the headers are needed too. For Weston having the headers in the
sysroot is enough, but in the future we may need these for QtWayland which
is built with just the toolchain, so include them in the toolchain too.

Change-Id: I81c4609d69da788460071b441cdec26f0dc1cbd0
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Use full path for the -u argument in repo tool, since creating mirror does
not work without full path. The GROUPS variable causes problems when /bin/sh
is linked to bash.

Change-Id: Ie276c8177f3381209a21110b9f84fbff45e3a23f
Reviewed-by: Rainer Keller <rainer.keller@theqtcompany.com>

This enables sources to be fetched from the Qt SDK, if available, instead of
internal git repositories. Required for BYOS customers to build B2Qt things.
Git repositories in SRC_URI are configured with 'local-uri' parameter, that
defines the path to the source code directory inside the Qt SDK. The base
path to Qt SDK is set in local.conf when setup-environment.sh in run.

Change-Id: I7f5e96fb6b9e9e55cac9d50cefb17830618193b8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>

jpeg-turbo seems to be industry standard because of better performance
on x86 and arm.

Change-Id: I2928654b43af9e41bdeda200701980cce3f64ac1
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Include necessary gstreamer plugins to enable camera usage in Qt.
Camera is enabled in RPi boot configuration, and needed kernel modules
are loaded during boot on in RPi and SABRE.

Change-Id: Iaeb17933b7d7dabb30db638db6594ab6aada05a0
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>

Change-Id: Ib506ebd57e0943cbbd2b4dfcb6291a3938807c1f
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>

Path to meta-ti layer got changed when meta repo checkout was changed.
Correctly find all the files again.

Change-Id: Ia5a7dee56ff33fcc039791b90f15a242439106d9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

One warning less on build.

Change-Id: I8bbf6ace700a0843ad66c4118053437de73ff2e8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Configure checks for libffi in nativesdk build as well.

Change-Id: I77e0d083dad29ea5436527b556c0d5cfadb74ef3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

Match with meta-poky version. Parallel threads are now configured based
on the CPU count.

Change-Id: If82e8b55778c9c822e5aa8e7558a68919b74f666
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

- use the already fetched .repo/repo as a workaround for repo tool's
mandatory -u argument
- rename environment-setup.sh script
- Add notice about correctly sourcing the environment-setup.sh script

Change-Id: I4ac3cf26ca30ae1c14474cf9fb15e65ebc0be3ac
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Branch V2.3 is done agains daisy, so we can remove old recipes
copied from dora branch.

Change-Id: I0532c05ec3a3253f55d78f0090a75e7423dca90e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

This repo manifest can be used to easily fetch the latest versions
(daisy or equivalent) of all the upstream meta repositories.

Change-Id: I98c0920d57d006a1effc27c11540580c29455f90
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

The boneblack u-boot config adds support for environment storage
in eMMC. Kernel image type is changed to zImage to reflect which
is what the u-boot defaults to. For older versions of u-boot that
try to use uImage, set extra u-boot arguments in uEnv.txt.

Change-Id: I98bd37db41a7c80a1aa75e9ae53c1e00589fde64
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Reviewed-by: Kalle Viironen <kalle.viironen@digia.com>

* origin/stable:
  Use libreoffice repo for hunspell dictionaries

Change-Id: I00118fd748a4400f0daf5daf173e7142ce0be9d0

Host part of the SDK need to be configured per device as well,
otherwise wayland is build for all machines.

Change-Id: If5287da32f1f09fef47826576e48060f6a9b642c
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>

Intead of modifying one commong bblayers.conf.sample file, create separate
configs for each device type that uses different set of meta layers.

Unknown devices now use all meta layers by default.

Change-Id: I2bbcf803951c0c8c787b789420c325166b2ebbd5
Reviewed-by: Andy Nichols <andy.nichols@digia.com>

From v1.6, yocto supports wildcards in .bbappend file names. This is
practical since we then don't have to rename them every time the
upstream version changes slightly. Also allows for support of earlier
poky versions.

Change-Id: Ib21e6fa1b56d11421c06af353c6ba848f38e07e0
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

These initialization script will create a build environment which has only
the needed meta layers from upstream. Other repos are ignored and not even
downloaded.

Google's repo tool is used to fetch upstream repos and it can then be
used to manage the repos while developing. This has also support for
using local mirror repos.

The required repos are defined in the manifest.xml file, which can be
overwritten using a machine specific manifest_<device>.xml file.

Task-number: QTEE-760
Change-Id: I12ed9a6fddceb4de1217baaebf46277c6ef7224f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

weston-examples may get removed later on, for now they are necessary
for testing and development.

Change-Id: I0bbb1d9d66045d8844f07d8e0bca9d7fc19251c3
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Create new layer for recipes and files that required only when
meta-toradex layer is used. For now, the bblayers.conf
template still includes the new layer as well.

Change-Id: Ib2c81a444786845f2e7c2fbf78dd0676459996c0
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Create new layer for recipes and files that required only when
meta-beagleboard layer is used. For now, the bblayers.conf
template still includes the new layer as well.

Change-Id: I5e50067b8b6c7d480d3808a24e8acc2ace07b04b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Create new layer for recipes and files that required only when
meta-fsl-arm and meta-fsl-arm-extra layers are used. For now,
the bblayers.conf template still includes the new layer as well.

Change-Id: I01a0019ebaea3e1532f106e076f7608fb7aa86c6
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Create new layer for recipes and files that required only when
meta-ti layer is used. For now, the bblayers.conf template still
includes the new layer as well.

Change-Id: Iab8f6b3a61578e7a9579066ae7facca5a9a1f33b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

These got in by mistake and are not needed.

Change-Id: I91d31c42aa4034689a71b0c800ccaa3365389cf6
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

One of the URL no longer worked, so using libreoffice for all of the
hunspell dictionaries.

Change-Id: Ie8c58125073d4d0b444e91e05b08cea1dbc94ce9
Reviewed-by: Rainer Keller <rainer.keller@digia.com>

iMX6 devices have dsp codec that are able to play the video, but TI
hardware don't have this, so add software codecs instead.

Change-Id: I6192b042f8e1ea219486a948e075250e09790def
Reviewed-by: Kalle Viironen <kalle.viironen@digia.com>

Linux kernel version 3.8 from meta-beagleboard adds support for the cape
manager. Using powervr driver version 4.10.00.01, SGX is also supported.
Patches for the kernel and SGX are taken from TI support pages.

Kernel args need 'quiet' for HDMI to work, otherwise you only get black
screen. Double buffering (libpvrPVR2D_FLIPWSEGL.so) does not work,
need to use FRONT buffering which can cause screen tearing.

Task-number: QTEE-312
Change-Id: I160e7e954ce9d060b0cb1bdaca70b24de9ccd697
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>

Add --reference <existing-build-dir> argument. If one has an already
checked out build directory, save download time and disk space by
reusing the git object storage.  Ref. git clone --reference.

Change-Id: I89327597a29cb5e7e5c86acefcdf33e3ee42d0fc
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

With --force argument, the b2qt-init-build-env script can be used
to update already checked out meta layer repos to updated SHA1s

Change-Id: I123714da29fa19eb8adc76a811a6daddab6f217d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Not needed by updater framework and this was causing problems for
other devices than nitrogen6x.

Change-Id: I256b8e187e693ac145936c255213a7faaf65c8a6
Reviewed-by: Rainer Keller <rainer.keller@digia.com>