Change-Id: Ib005dd0fde3b2b4d5bfb8fbea4b8234f8ef2f78e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Must not unset BUILDDIR as it is exported by oe-init scripts, and
used by Toaster and Qemu at least.

Change-Id: I5b004190ad49d7846e2ae7fa3e262ea6d6354ea1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Keyboard input is not functional without the key mapping services
provided by libxkbcommon. Needed when building the Wayland platform
plugin. When not present, all keyboard mapping is disabled and the
result is not compatible with Weston.

Task-number: QTEE-832
Change-Id: Iaad556e09a6fa35eafaab2e089d6def374903047
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Did not work when running from SDK installation.

Change-Id: I96ace01b0424304e33894364b1f263e511a2bab8
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: Ibdca2cab6e86d416fd871517f252ab8dfa4f1cde
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: I2994541fb6e9489dfbbd7e5662f133d8037e5146
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Previous kernel no longer compiled.

Change-Id: If8000dc0e4c9e3674399381a327774767fb7d48d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

build-all.sh can be used to build image and toolchain for all
device which have build environment already setup. Have to use bash,
since the oe-init-build-env does not support dash.

Change-Id: I95778919015b40444f229d471791b5637de7d0d3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

If the toolchain is added to PATH, the python needs to have enough
modules to able to build QtWebEngine.

Task-number: QTEE-824
Change-Id: I2c9f977118f70928735eb7663d272364c5fa6754
Reviewed-by: Andras Becsi <andras.becsi@theqtcompany.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: I31aa3ef4f738b579b615022d3194dfe496fe213c
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

* origin/stable:
  toolchain: include base-files
  Update meta-fsl-arm-extra to fix u-boot-boundary fetch failure
  Install fonts with help of Yocto recipes
  bbb: remove preferred version for SGX
  Update Qt logo
  Remove u-boot-fw-utils
  Change copyright notice

Conflicts:
	b2qt-init-build-env
	conf/distro/include/beaglebone.conf
	recipes/packagegroup/nativesdk-packagegroup-b2qt-embedded-toolchain-target.bb

Change-Id: I5b22412d0530e70057f705da34247803498ddde3

upload.sh can be used to upload machine images and toolchain to
ci-files02-hki, which is used by the b2qt build scripts. It also does
some necessary renaming and the special handing for Freescale SABRE
board boot package.

Change-Id: I73a0873669a5e5a7929ec27cb929e29616def8cf
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

Every device does not need to define IMAGE_FSTYPES and ADB_PRODUCTID.

Change-Id: I05d255727a6fb533850069dc7513c06d06a995b4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Include needed files (kernel dtbs, firmware) to support the Dual
and Duallite version of Freescale SABRE SD boards using the same
rootfs. The boards are using different u-boot binaries, but that
needs to be sorted outside of yocto.

Change-Id: I6223b611cb9d8c4f5c7cd02da66902782a1e2ed2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

These wildcard changes would be needed when moving to dizzy.

Change-Id: Ic9aa4fe48d8b23a894eb3abcf416e1a2895f3327
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: Ie4fdf57b986eb24cb16dfb9f347ae02e7648bf86
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Use common sources and headers to provide both dummy OpenGL libs and
QtGlesStream lib.

Change-Id: Ia71c3ffd7b1f45bf5eea5ac78027c8439855aac5
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Build QtGlesStream dummy client and use the EGL headers from there,
instead of Mesa. The actual QtGlesStream module still needs to build
elsewhere.

Task-number: QTEE-557
Change-Id: I2d50522b920fb49eaf5086b105fc2e6e37eef686
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

The broadcom recipe does not exist there.

Change-Id: Iad3aeda85f3e0b7ccda39841ac2f92d597d3bc45
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: I30b0cd06eb04fc38cad823c7e6c154aa34d25e09
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Adb over USB work correctly in Toradex Apalis iMX6 as long as the jumper (JP2)
is correctly set on the Ixora carrier board.

Task-number: QTEE-671
Change-Id: If1e070e532b5a8fe0eff29b125e0a690b4218c8f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

glTexImage2D function declared in amd-gpu-bin-mx51 package (gl.h) has
incorrect parameter types, which cases Qt5 build to fail.

Change-Id: Ib45a4d9c1f94a0e2213488e8f447eb443feb05d3
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

Nitrogen6X/6_Max/6_Lite all use the nl80211 driver for wpa_supplicant
and none of them have an eth1 device.

Change-Id: I17a316d79a1d787229fd9acb758d993921e85dfb
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Adding Broadcom bcm4330 firmware allows use of the same image on
Nitrogen6_Lite.

Change-Id: I2eebe658ea9f81f42d670a47acd7dcd2c6d0909c
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Include the Device Tree binaries for Nitrogen6_Lite and Nitrogen6_Max
to avoid building a completely separate image for each.

Since the Nitrogen6_Lite device tree isn't built by the stock image
in meta-fsl-arm-extra, append it to the KERNEL_DEVICETREE variable.

Change-Id: I085e0473773c84308cb0d826eb8d2da444036ea5
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Previous kernel config changes are now merged upstream, and the fix
for the imx-vpu is also in, so all configuration changes can be removed.

Add support for Nitrogen6_Lite. The Nitrogen6_Lite board supports
a Broadcom 4331 WiFi/Bluetooth module, and typically has one of its'
GPIO ports configured as an LED_GPIO control (for a dry-contact output).

Change-Id: I840e7703624c652acf0a0262102e6491a3908719
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Kernel is now using dtb, include it in the bootfs.
U-boot update to make sdboot the default.
Include u-boot script for updating the u-boot.

Change-Id: I7e4f01ad3d903fbf807c5bf3904a9f955a59e97a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Change-Id: I7e96ba55da0d8b872d9368d91a8bc66a1d37e53c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Builds & runs ok!

The current implementation is done with the strategy of using the
vendor's defined repo versions for the yocto stack, instead of the
common versions defined by b2qt. The intention is to build upon the
vendor stack as closely as possible, as that is (hopefully) tested and
maintained.

Task-number: QTEE-801
Change-Id: Ib93b54178de870b5f288b2fae982ea2b4bb74e50
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: Iaefed14f1d2bfecb436c2bfa68c94ffe74672128
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

libgal-dev only provides libGAL.so in the toolchain. That is not enough
when compiling a hardware compositor (e.g. the Weston hw compositor patch)
because the headers are needed too. For Weston having the headers in the
sysroot is enough, but in the future we may need these for QtWayland which
is built with just the toolchain, so include them in the toolchain too.

Change-Id: I81c4609d69da788460071b441cdec26f0dc1cbd0
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Use full path for the -u argument in repo tool, since creating mirror does
not work without full path. The GROUPS variable causes problems when /bin/sh
is linked to bash.

Change-Id: Ie276c8177f3381209a21110b9f84fbff45e3a23f
Reviewed-by: Rainer Keller <rainer.keller@theqtcompany.com>

This enables sources to be fetched from the Qt SDK, if available, instead of
internal git repositories. Required for BYOS customers to build B2Qt things.
Git repositories in SRC_URI are configured with 'local-uri' parameter, that
defines the path to the source code directory inside the Qt SDK. The base
path to Qt SDK is set in local.conf when setup-environment.sh in run.

Change-Id: I7f5e96fb6b9e9e55cac9d50cefb17830618193b8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>

jpeg-turbo seems to be industry standard because of better performance
on x86 and arm.

Change-Id: I2928654b43af9e41bdeda200701980cce3f64ac1
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Include necessary gstreamer plugins to enable camera usage in Qt.
Camera is enabled in RPi boot configuration, and needed kernel modules
are loaded during boot on in RPi and SABRE.

Change-Id: Iaeb17933b7d7dabb30db638db6594ab6aada05a0
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>

Change-Id: Ib506ebd57e0943cbbd2b4dfcb6291a3938807c1f
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>

Path to meta-ti layer got changed when meta repo checkout was changed.
Correctly find all the files again.

Change-Id: Ia5a7dee56ff33fcc039791b90f15a242439106d9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

One warning less on build.

Change-Id: I8bbf6ace700a0843ad66c4118053437de73ff2e8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Configure checks for libffi in nativesdk build as well.

Change-Id: I77e0d083dad29ea5436527b556c0d5cfadb74ef3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>