linux-imx is now new enough, so it doesn't require perf patches.
DL version of nitrogen6_max is not supported.

Change-Id: Ic5d6fce0f1ed904aed3795d4f82abc5f71b16b30
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>

Change-Id: Ie782495f23bd71320edcf35128801d176c71ad5b
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>

Gerrit Sanity Bot does not like tabs, so remove them from recipes.

Change-Id: Ic0bede29c9a4a01a2bd816e6771fafd76b2323e2
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>

Add support for webcams for Boundary Devices imx6

Change-Id: I8ea1b056c5eab7120c4269a98710de322fb304e0
Reviewed-by: Karim Pinter <karim.pinter@theqtcompany.com>
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>

Increased from 256MB (the default) to 384MB. Without this,
HW-accelerated video decoding cannot work for high resolution
videos.

The same might have to be done on other iMX devices.

Change-Id: I202ee246d59ded0343a93b6bdf221bd69fcd22c5
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

The linux-oe-g++ mkspec used by meta-qt5 depends on the user sourcing
the toolchain environment-setup script, which modifies the PATH and
sets a long range of environment variables. That is not a "best
practice" way of use Qt, and does not allow smooth integration of the
toolchain into Qt Creator.

Here, we instead create a static mkspec for the toolchain:
devices/linux-oe-generic-g++. The toolchain recipe will will the
qdevice.pri file with the required compiler flags etc. for the target.

Additionally, we introduce an extra .pri file for device-specific
settings, so they can be shared between the two mkspecs.

Change-Id: Ie5a019524ba6cdddffb71b0c7c28861ddba17fbd
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Use meta-qt5 layer to build Qt5, commercial addons and b2qt addons.
Create new image and toolchain recipes with Qt5 content, so that the
existing image and toolchain remain as-is without Qt5.
Currently support only for imx6 targets.

Change-Id: I398750dd1a62c6ff8ea216cfe364da273d8e9a77
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: I5e3852df441196315c9f8ab209ffe21ca490c0ee
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Build perf with DWARF unwinding support. Kernels older then 3.14
need to be patched to add ARM support. Kernels for tibidabo (3.0)
and imx53 (2.6) are too old and would require more patches to be
backported, so they are left without unwinding support.

RPi needed extra layer to modify the kernel recipe, and linux-imx
recipe was renamed so that it doesn't conflict with older tibidabo
kernel recipe.

Change-Id: Ic8331f8feeace67b32a5ce99ffd3fda517d595d1
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>

Upstream was changed and already includes the I2C initialization.

Change-Id: I3e57a248a49924eff086eea7694ccd5fa424f905
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Latest kernel from dizzy branch, will be part of daisy at some point.
Fixes support for the Nit6X_800x480 display.

Change-Id: I1a886998b3e3f12750bfc93f2d06f33047aa850f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: Ib005dd0fde3b2b4d5bfb8fbea4b8234f8ef2f78e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

These wildcard changes would be needed when moving to dizzy.

Change-Id: Ic9aa4fe48d8b23a894eb3abcf416e1a2895f3327
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

glTexImage2D function declared in amd-gpu-bin-mx51 package (gl.h) has
incorrect parameter types, which cases Qt5 build to fail.

Change-Id: Ib45a4d9c1f94a0e2213488e8f447eb443feb05d3
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

Adding Broadcom bcm4330 firmware allows use of the same image on
Nitrogen6_Lite.

Change-Id: I2eebe658ea9f81f42d670a47acd7dcd2c6d0909c
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Previous kernel config changes are now merged upstream, and the fix
for the imx-vpu is also in, so all configuration changes can be removed.

Add support for Nitrogen6_Lite. The Nitrogen6_Lite board supports
a Broadcom 4331 WiFi/Bluetooth module, and typically has one of its'
GPIO ports configured as an LED_GPIO control (for a dry-contact output).

Change-Id: I840e7703624c652acf0a0262102e6491a3908719
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Change-Id: Iaefed14f1d2bfecb436c2bfa68c94ffe74672128
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

libgal-dev only provides libGAL.so in the toolchain. That is not enough
when compiling a hardware compositor (e.g. the Weston hw compositor patch)
because the headers are needed too. For Weston having the headers in the
sysroot is enough, but in the future we may need these for QtWayland which
is built with just the toolchain, so include them in the toolchain too.

Change-Id: I81c4609d69da788460071b441cdec26f0dc1cbd0
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Branch V2.3 is done agains daisy, so we can remove old recipes
copied from dora branch.

Change-Id: I0532c05ec3a3253f55d78f0090a75e7423dca90e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

From v1.6, yocto supports wildcards in .bbappend file names. This is
practical since we then don't have to rename them every time the
upstream version changes slightly. Also allows for support of earlier
poky versions.

Change-Id: Ib21e6fa1b56d11421c06af353c6ba848f38e07e0
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>

Create new layer for recipes and files that required only when
meta-fsl-arm and meta-fsl-arm-extra layers are used. For now,
the bblayers.conf template still includes the new layer as well.

Change-Id: I01a0019ebaea3e1532f106e076f7608fb7aa86c6
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>