This is attempt to fix issue where, on some targets, bitbake fails with:
Cannot satisfy the following dependencies for packagegroup-b2qt-embedded-base:
 * jpeg *

jpeg will still be included in the images due to other dependencies.

Change-Id: I3f6f388c10f196785eafe020d2d6256efb500643
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Session address is saved to /var/run/dbus/session_bus_address, which is read
in /etc/profile.d/dbus-session-address for interactive login and by adbd for
applications launched from QtCreator.

Change-Id: I8e1f43bdb2f7a7b0450dacf39890cf149459bbf4
Reviewed-by: Rainer Keller <rainer.keller@theqtcompany.com>

Latest kernel from dizzy branch, will be part of daisy at some point.
Fixes support for the Nit6X_800x480 display.

Change-Id: I1a886998b3e3f12750bfc93f2d06f33047aa850f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: Ic1570b47511596806adf5d3feab2e4d1dccbaefd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

BUILDDIR is exported by the poky env script, which caused problems
on our env script when setting up second build dir.

Change-Id: Ieeecff6ebfc5ac185de98870dc8c4305c882684f
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

u-boot-script-toradex needs to be built before bootfs is built, so add
dependency to it.

Change-Id: Ife8b86e83b48a60922fa5138c8f452726bda8cc5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: I6cc4fbe6b2d7e8811c61083a262bd64381439855
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: I5747291fd7954030e2f4aea5ee3b415b1f82673e
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

The environment setup script is helpful when compiling other
than Qt apps.

Task-number: QTEE-881
Change-Id: Iabfc5ef4b807ec19b13d575b4555b56024f57614
Reviewed-by: Kalle Viironen <kalle.viironen@theqtcompany.com>

Move to latest version of adbd. Enable adb listen to both
usb and network sockets.

Task-number: QTEE-875
Change-Id: I6439356dc036ed372c17a71168809cf639a326a3
Reviewed-by: Rainer Keller <rainer.keller@theqtcompany.com>

Needed for camera support.

Change-Id: I6aceb232d7f4a260081e5a44a69271f535d2aec2
Reviewed-by: Gatis Paeglis <gatis.paeglis@theqtcompany.com>

Change-Id: I59141996d03c8600b2a4d131a987e618e5ff7f37
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Default fstab for toradex devices was not using tmpfs for /var/run,
so some daemons did to handle hard reset nicely. Networking and udev
were failing at least.

Using 'b2qt' folder name for the fstab file, so that bitbake uses that
instead of the files from meta-toradex.

Task-number: QTEE-857
Change-Id: Id93b127b2b7c02bec11818c4c1b7357bfe65ecbf
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: Ib005dd0fde3b2b4d5bfb8fbea4b8234f8ef2f78e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Must not unset BUILDDIR as it is exported by oe-init scripts, and
used by Toaster and Qemu at least.

Change-Id: I5b004190ad49d7846e2ae7fa3e262ea6d6354ea1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Keyboard input is not functional without the key mapping services
provided by libxkbcommon. Needed when building the Wayland platform
plugin. When not present, all keyboard mapping is disabled and the
result is not compatible with Weston.

Task-number: QTEE-832
Change-Id: Iaad556e09a6fa35eafaab2e089d6def374903047
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Did not work when running from SDK installation.

Change-Id: I96ace01b0424304e33894364b1f263e511a2bab8
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: Ibdca2cab6e86d416fd871517f252ab8dfa4f1cde
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Change-Id: I2994541fb6e9489dfbbd7e5662f133d8037e5146
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Previous kernel no longer compiled.

Change-Id: If8000dc0e4c9e3674399381a327774767fb7d48d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

build-all.sh can be used to build image and toolchain for all
device which have build environment already setup. Have to use bash,
since the oe-init-build-env does not support dash.

Change-Id: I95778919015b40444f229d471791b5637de7d0d3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

If the toolchain is added to PATH, the python needs to have enough
modules to able to build QtWebEngine.

Task-number: QTEE-824
Change-Id: I2c9f977118f70928735eb7663d272364c5fa6754
Reviewed-by: Andras Becsi <andras.becsi@theqtcompany.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: I31aa3ef4f738b579b615022d3194dfe496fe213c
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

* origin/stable:
  toolchain: include base-files
  Update meta-fsl-arm-extra to fix u-boot-boundary fetch failure
  Install fonts with help of Yocto recipes
  bbb: remove preferred version for SGX
  Update Qt logo
  Remove u-boot-fw-utils
  Change copyright notice

Conflicts:
	b2qt-init-build-env
	conf/distro/include/beaglebone.conf
	recipes/packagegroup/nativesdk-packagegroup-b2qt-embedded-toolchain-target.bb

Change-Id: I5b22412d0530e70057f705da34247803498ddde3

upload.sh can be used to upload machine images and toolchain to
ci-files02-hki, which is used by the b2qt build scripts. It also does
some necessary renaming and the special handing for Freescale SABRE
board boot package.

Change-Id: I73a0873669a5e5a7929ec27cb929e29616def8cf
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

Every device does not need to define IMAGE_FSTYPES and ADB_PRODUCTID.

Change-Id: I05d255727a6fb533850069dc7513c06d06a995b4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Include needed files (kernel dtbs, firmware) to support the Dual
and Duallite version of Freescale SABRE SD boards using the same
rootfs. The boards are using different u-boot binaries, but that
needs to be sorted outside of yocto.

Change-Id: I6223b611cb9d8c4f5c7cd02da66902782a1e2ed2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

These wildcard changes would be needed when moving to dizzy.

Change-Id: Ic9aa4fe48d8b23a894eb3abcf416e1a2895f3327
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>

Change-Id: Ie4fdf57b986eb24cb16dfb9f347ae02e7648bf86
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Use common sources and headers to provide both dummy OpenGL libs and
QtGlesStream lib.

Change-Id: Ia71c3ffd7b1f45bf5eea5ac78027c8439855aac5
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Build QtGlesStream dummy client and use the EGL headers from there,
instead of Mesa. The actual QtGlesStream module still needs to build
elsewhere.

Task-number: QTEE-557
Change-Id: I2d50522b920fb49eaf5086b105fc2e6e37eef686
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

The broadcom recipe does not exist there.

Change-Id: Iad3aeda85f3e0b7ccda39841ac2f92d597d3bc45
Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>

Change-Id: I30b0cd06eb04fc38cad823c7e6c154aa34d25e09
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Adb over USB work correctly in Toradex Apalis iMX6 as long as the jumper (JP2)
is correctly set on the Ixora carrier board.

Task-number: QTEE-671
Change-Id: If1e070e532b5a8fe0eff29b125e0a690b4218c8f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

glTexImage2D function declared in amd-gpu-bin-mx51 package (gl.h) has
incorrect parameter types, which cases Qt5 build to fail.

Change-Id: Ib45a4d9c1f94a0e2213488e8f447eb443feb05d3
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>

Nitrogen6X/6_Max/6_Lite all use the nl80211 driver for wpa_supplicant
and none of them have an eth1 device.

Change-Id: I17a316d79a1d787229fd9acb758d993921e85dfb
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Adding Broadcom bcm4330 firmware allows use of the same image on
Nitrogen6_Lite.

Change-Id: I2eebe658ea9f81f42d670a47acd7dcd2c6d0909c
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Include the Device Tree binaries for Nitrogen6_Lite and Nitrogen6_Max
to avoid building a completely separate image for each.

Since the Nitrogen6_Lite device tree isn't built by the stock image
in meta-fsl-arm-extra, append it to the KERNEL_DEVICETREE variable.

Change-Id: I085e0473773c84308cb0d826eb8d2da444036ea5
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>

Previous kernel config changes are now merged upstream, and the fix
for the imx-vpu is also in, so all configuration changes can be removed.

Add support for Nitrogen6_Lite. The Nitrogen6_Lite board supports
a Broadcom 4331 WiFi/Bluetooth module, and typically has one of its'
GPIO ports configured as an LED_GPIO control (for a dry-contact output).

Change-Id: I840e7703624c652acf0a0262102e6491a3908719
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@digia.com>